Abstract:Comparison of the influences of the preparation methods and reaction conditions to the properties of SnO2 powder, especially the specific surface area and the stability under high temperature calcination were performed. SnO2 prepared by precipitation method using NaOH solutions as the precipitating agent in the pH region of 10 and aged at 100 degreesC for 48 h had the highest BET surface area of 93.5 m(2) . g(-1) after calcination at 500 degreesC for 4 h. The materials maintained a surface area of 75.2 m(2) . g(-1) after 800 degreesC and 53.2 m(2) . g(-1) after 1000 degreesC calcination. The sample using NH3 . H2O as precipitation agent had the lowest BET surface area calcinied under the above three temperatures. It was shown that using NaOH as precipitation agent and digestion at high temperature was beneficial to maintain high surface area and good stability under high temperature. One of the reasons is that the digestion under high temperature reduced the water content in the hydrous tin oxide gel, so the initial structure of the particle was enhanced during the drying and calcining process. The other reason is that the crystallization of the initial particles was enhanced during the digestion and the defect on the surface was reduced also, so the sintering due to the surface diffusion was restrained. Further more, washing with ethanol reduced the formation of hardcore agglomeration between the particles, thus improved the stability of the particles under high temperature calcining process.

Synthesis and Characterization of Bismuth-Doped Tin Dioxide Nanometer Powders

Synthesis and Characterization of Sn1-xBixO2 Nano-powder

A Study on the Influencing Factors in the Preparation of Bismuth-doped Tin Oxide Nano-powders by Co-Precipitation

Preparation of Antimony-Doped Sno2 Nanocrystallites

PREPARATION OF NANOSIZED Bi3.25 La0.75 Ti3 O12 POWDER BY COPRECIPITATION METHOD

Influences of Preparation Conditions on the Ytterbium-Doped Tin Oxide Nano-Powders

Elimination of Hard Aggregation of Bismuth-Doped Tin Dioxide Nanometer Powders Prepared by Wet Chemical Method

Effects of pH value and calcining temperature on indium tin oxide nanopowder synthesized by co-precipitation

SYNTHESIS AND CHARACTERIZATION OF SM-DOPED BaTiO_3 NANOPOWDERS

Synthesis of Tin Oxide Nanoparticles by Precipitation Process: Effects of pH and Temperature on the Particle Size and Morphology

SYNTHESIS AND CHARACTERIZATION OF SM-DOPED BaTiO3 NANOPOWDERS

Synthesis and Electrical Property of Antimony-Doped Tin Oxide Powders with Barite Matrix

PREPARATION AND CHARACTERIZATION OF Sb-SnO_2/BaSO_4 CONDUCTIVE POWDER

Preparation and characterization of indium-doped tin dioxide nanocrystalline powders

Semiconductivities of Sn-doped In2O3 Powder Prepared by Co-Precipitation Through Ion Exchange Method

Thermoanalysis Studying on the Preparation Process of Ultrafine Bismuth Oxide Powder

Preparation of Ba(Ti0.9Sn0.1)O3 Powder by Hydrothermal Process

Preparation and Optical Properties of Ni-doped PbBiO2Br Nanoparticles

Solvothermal Preparation and Characteristics of Sn-doped In2O3

Preparation of Tin Dioxide Powder with High Specific Surface Area and Stability at High Temperature

Influence of Preparing Condition on Characteristics and Electronic Property of Nanometer-sized Antimony Tin Oxide Powders by Hydrothermal Method