Abstract:A quasi-continuous-wave (QCW) laser diode (LD) driver is commonly used to drive diode bars and stacks designed specifically for QCW operations in solid-state lasers. Such drivers are optimized to deliver peak current and voltage pulses to LDs while maintaining low average power levels. As a result, they are widely used in laser processing devices and laser instruments. Traditional high-energy QCW LD drivers primarily use capacitors as energy storage components and pulsed constant-current sources with op-amps and power metal-oxide-semiconductor field-effect transistors (MOSFETs) as their core circuits for generating repeated constant-current pulses. The drawback of this type of driver is that the driver's output voltage needs to be manually adjusted according to the operating voltage of the load before use to maximize driver efficiency while providing a sufficient current. Another drawback is its inability to automatically adjust the output voltage to maintain high efficiency when the load changes during the driver operation. Drastic changes in the load can cause the driver to fail to function properly in extreme cases. Based on the above traditional circuit structure, this study designed a stability compensation circuit and realized a QCW LD driver for driving a GS20 diode stack with a maximum repetition rate of 100 Hz, a constant current of approximately 300 A, a load voltage of approximately 10 V, and a pulse width of approximately 300 μs. In particular, a high-efficiency, load-adaptive driving method was used with the MOSFETs in the critical saturation region (i.e., between the linear and saturated regions), controlling its power loss effectively while achieving maximum output current of the driver. The experiments demonstrated that the driver efficiency could be maintained at more than 80% when the load current varied from 50 to 300 A.

Improving the Switching Performance of A Wavelength-Tunable Laser Transmitter Using A Simple and Effective Driver Circuit

Digital Wavelength Switching by Thermal and Carrier Injection Effects in V-coupled Cavity Semiconductor Laser

Fast Switching Characteristics of a Widely Tunable Laser Transmitter

Simple and Compact Tunable Semiconductor Lasers Based on Novel Half-Wave Coupler

Wavelength Switchable Semiconductor Laser Based on Half-Wave Coupled Fabry–Pérot and Rectangular Ring Resonators

Design and Implementation of a Power Semiconductor-Based Switching Mode Laser Diode Driver

Research Progress in Low-Cost Tunable Semiconductor Lasers

Static and Dynamic Characteristics of Digital Wavelength Switching in V-Coupled-Cavity Semiconductor Laser

Wavelength Switching and All-Optical Flip-Flop in Tunable V-cavity Laser

Single-Electrode-Controlled 26x100ghz Wavelength Switching in V-Coupled-Cavity Semiconductor Laser

Wavelength switchable semiconductor laser using half-wave V-coupled cavities.

Tunable V-Cavity Laser with Butt-Joint Passive Tuning Section for Fast Wavelength Switching

Step-Pulse Modulation of Gain-Switched Semiconductor Pulsed Laser

Monolithic GaN-Based Driver and GaN Switch With Diode-Emulated GaN Technique for 50-MHz Operation and Sub-0.2-ns Deadtime Control

An Efficiency Improvement Driver for Master Oscillator Power Amplifier Pulsed Laser Systems

GaAs Based Gratingless Wavelength Tunable Semiconductor Laser

Experimental Demonstration of Subnano-Second Wavelength Switching in V-Coupled-Cavity Semiconductor Laser

Simulation And Design Of Monolithically Integrated Tunable Wavelength Converter Based On V-Cavity Laser And Delayed Mach-Zehnder Interferometer

Optimization of Tunable Semiconductor V-cavity Laser for Analog Application

A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode

Tunable high-repetition-rate pulse generation via passive Q-switched semiconductor laser