Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Computational Limit Analysis of Anisotropic Axisymmetric Shells

Investigation on Plastic Instability of a Thin-Walled Anisotropic Cylindrical Shell Subjected to Internal Impulsive Loading

A Semi-Analytical Method for the Dynamic Analysis of Cylindrical Shells with Arbitrary Boundaries

Elastoplastic Solution and Limit Load Analysis of Orthotropic Cylindrical Shell Subjected to Internal Pressure

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Unified Plastic Limit Solution for Thick-Walled Cylinder with Size Effect

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Analytical solutions for limit loads of simply supported conical shells under internal pressure with unified yield criterion

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

THE LIMIT ANALYSIS OF CYLINDRICAL SHELL WITH HEMISPHERICAL ENDS

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

A Stress Analysis Method for Cylindrical Shells With Nozzles Subjected to Internal Pressure, External Forces and Moments

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

A Thin Shell Theoretical Solution for Two Intersecting Cylindrical Shells Due to External Branch Pipe Moments

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Stress distributions and stiffness anisotropy of circumferentially corrugated shells under uniform external pressure