Abstract:Almost 29.57–38.46 million tons of zinc-bearing dust were produced in Chinese iron and steel enterprises annually. The recovery of Zn and other metals in zinc-bearing dust from ironmaking and steelmaking could improve economic efficiency. However, zinc-bearing dust was classified as hazardous waste, and the volatile metals (like Zn, Na, Pb, etc.) in zinc-bearing dust limited the direct reusing in a blast furnace. Therefore, the formation process, fundamental characteristics, and current extraction process of Zn from zinc-bearing dust, associated with thermodynamics and kinetics of the pyrometallurgical process, hydrometallurgical process, and pyro-hydrometallurgical process, were analyzed. It is indicated that industrialized pyrometallurgical processes are undergoing high energy consumption and pollution such as rotary kiln and rotary hearth furnace process. The vacuum carbothermal reduction process can realize low carbon emission and no waste produced in the process. The hydrometallurgical leaching processes in strong acid, strong alkali, and ammonium solutions result in serious liquid pollution and equipment corrosion. The pyrometallurgical process involves complex kinetics and lacks kinetic research on semi-industrialization and industrialization. Water-soluble components in zinc-bearing dust can be removed by water leaching. The kinetics of the strong acid leaching is mainly controlled by the leaching kinetics of Fe2O3 and ZnFe2O4, while the alkali leaching and weak acid leaching are controlled by the kinetics of ZnO leaching. Zn in the zinc-bearing dust can be extracted by a low-temperature sodium roasting–weak acid leaching process that reduces equipment corrosion and environmental pollution.

Experimental Research on Low-temperature Magnetic Roasting of Zinc-bearing Dust in Iron and Steel Plant

Enrichment and Recovery of Iron from Zinc-bearing Blast Furnace Dust

Experimental Research on Rducting Roasting and Low Intensity Magnetic Separation of a Refractory High Al-Si Iron Ore

Separation of Zinc from Zinc Ferrite by Magnetization Roasting and Ammonia Leaching

Separating and Enriching Zinc from Metallurgical Dust at Low Temperature

Separation of Iron and Zinc Values from Blast Furnace Dust Adopting Reduction Roasting-Magnetic Separation Method by Sawdust Pyrolysis

Ecofriendly extraction of zinc from hazardous electric arc furnace dust via sulphating roasting: Non-isothermal and isothermal kinetics analyses

Synergetic Utilization of Zinc-Bearing Dust by Carbothermic Reduction-Roasting Process: Phase Transformation and Morphological Evolution

Direct Conversion of Electric Arc Furnace Dust to Zinc Ferrite by Roasting: Effect of Roasting Temperature

Experimental Research on Fine Reduction of EAF Dust at Xinyesteel

Research status and development of extraction process of zinc-bearing dust from ironmaking and steelmaking—a critical review

A new technic experimental study on precise reduction of iron oxide-separation of non-molten of iron oxide

Thermodynamic and experimental study of high-temperature roasting of blast furnace gas ash for recovery of metallic zinc and iron

Experiments on Roasting Technology Magnetic Separation of Oolitic Hematite Ore by the Circulating Fluidized Bed

Novelty on deep reduction roasting through removal of lead and zinc impurities from iron ore afore ironmaking

Fundamental Study on Utilization of Tin and Zinc-Bearing Iron Concentrate by Selective Chlorination

Magnetizing Roasting-Magnetic Separation of Limonite Ores from Anhui Provice in East China

Mineral Phase Reconstruction and Separation Behavior of Zinc and Iron from Zinc-Containing Dust

Experimental Study on Solid State Recovery of Metallic Resources from EAF Dust

Study on tin and zinc recovery and pellet preparation for blast furnace from iron concentrate containing tin and zinc

Sulfidation Roasting of Zinc Leaching Residue with Pyrite for Recovery of Zinc and Iron