Abstract:With pure Ti and pure Zr as controls, the corrosion resistance, ion release behavior, and in vitro biocompatibility of Be-containing Zr41Ti14Cu12Ni10Be23 bulk metallic glass (BMG) (LM1), Zr44Ti11Cu10Ni10Be25 BMG (LM1b), and Be-free Zr57Nb5Cu15.4Ni12.6Al10 BMG (LM106) were investigated in terms of electrochemical measurements in simulated body fluid (SBF) with pH value 7.4 and artificial saliva (AS) with pH value 6.3, and 3-[4,4-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay using L929 and NIH3T3 cells, aiming to assess the feasibility of Zr-based BMGs as potential biomaterial. It was found that LM1b showed superior corrosion resistance to LM106 and LM1 in both SBF and AS, and comparable with pure Ti and pure Zr. After 7200 s immersion, a two-layer structure oxide film was formed on LM1, LM1b, and pure Zr surfaces, while one-layer structure oxide film was formed on LM106 and pure Ti surfaces. The pitting corrosion potentials of LM1b were much higher than that of LM1, LM106, and pure Zr, resulting in very few ions releasing into the electrolytes. No Be ion could be detected but a little amount of Cu ion was detected for LM106, LM1, and LM1b after immersion in Dulbecco's modified Eagle's medium for 72 h at 37 degrees C. The indirect cytotoxicity results show that LM106, LM1, and LM1b extracts had no cytotoxicity to L929 and NIH3T3 cells. The direct cytotoxicity results show that cells could adhere well on the Zr-based BMG surface as in pure Ti and Zr. Lower cell proliferation rate of LM106 and LM1 is observed when compared with LM1b, which was found to be caused by Cu ion releasing rather than by Be ion. (C) 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 96B: 34-46,2011.

Bio-corrosion Study on Zirconium-Based Bulk-Metallic Glasses

In Vitro Study On Zr-Based Bulk Metallic Glasses As Potential Biomaterials

In Vitro Cytocompatibility of a Zr-based Metallic Glass Modified by Laser Surface Texturing for Potential Implant Applications

Tailoring the glass forming ability, mechanical properties and corrosion resistance of Cu–Zr–Al bulk metallic glasses by yttrium addition

Enhanced corrosion resistance of a ZrCuNiAl bulk metallic glass in simulated groundwater by minor crystallization

Deformation behavior, corrosion resistance, and cytotoxicity of Ni-free Zr-based bulk metallic glasses

Corrosion mechanisms of Zr-based bulk metallic glasses in NaBr solution

Effect of Yttrium Doping on Glass-Forming Ability, Thermal Stability, and Corrosion Resistance of Zr50.7Cu28Ni9Al12.3 Bulk Metallic Glass

The effect of Nb addition on mechanical properties, corrosion behavior, and metal-ion release of ZrAlCuNi bulk metallic glasses in artificial body fluid

Effect of Thermal Oxidization on Corrosion Behavior of Zr-based Bulk Metallic Glass

Study on bio-corrosion and cytotoxicity of a Sr-based bulk metallic glass as potential biodegradable metal

Ti Microalloying Effect on Corrosion Resistance and Thermal Stability of CuZr-based Bulk Metallic Glasses

Thermal Oxidation Effect on Corrosion Behavior of Zr46Cu37.6Ag8.4Al8 Bulk Metallic Glass

In Vitro Investigation of Novel Ni Free Zr-based Bulk Metallic Glasses As Potential Biomaterials

Corrosion Performances in Simulated Body Fluids and Cytotoxicity Evaluation of Fe-based Bulk Metallic Glasses

The Effect of Oxidation on the Corrosion Resistance and Mechanical Properties of A Zr-Based Metallic Glass

Biocompatibility of Ni-free Zr-based Bulk Metallic Glasses

Ductile behavior and excellent corrosion resistance of Mg-Zn-Yb-Ag metallic glasses

Zr–Ti–Al–Fe–Cu bulk metallic glasses for biomedical device application

Enhanced wear, corrosion, and corrosive-wear resistance of the biocompatible Ti-based bulk metallic glass by oxidation treatment

Effect of Y Contents on the Microstructure, Mechanical Properties, and Corrosion Behavior of Biomedical Mg‐0.5Zn Alloy