Abstract:With pure Ti and pure Zr as controls, the corrosion resistance, ion release behavior, and in vitro biocompatibility of Be-containing Zr41Ti14Cu12Ni10Be23 bulk metallic glass (BMG) (LM1), Zr44Ti11Cu10Ni10Be25 BMG (LM1b), and Be-free Zr57Nb5Cu15.4Ni12.6Al10 BMG (LM106) were investigated in terms of electrochemical measurements in simulated body fluid (SBF) with pH value 7.4 and artificial saliva (AS) with pH value 6.3, and 3-[4,4-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay using L929 and NIH3T3 cells, aiming to assess the feasibility of Zr-based BMGs as potential biomaterial. It was found that LM1b showed superior corrosion resistance to LM106 and LM1 in both SBF and AS, and comparable with pure Ti and pure Zr. After 7200 s immersion, a two-layer structure oxide film was formed on LM1, LM1b, and pure Zr surfaces, while one-layer structure oxide film was formed on LM106 and pure Ti surfaces. The pitting corrosion potentials of LM1b were much higher than that of LM1, LM106, and pure Zr, resulting in very few ions releasing into the electrolytes. No Be ion could be detected but a little amount of Cu ion was detected for LM106, LM1, and LM1b after immersion in Dulbecco's modified Eagle's medium for 72 h at 37 degrees C. The indirect cytotoxicity results show that LM106, LM1, and LM1b extracts had no cytotoxicity to L929 and NIH3T3 cells. The direct cytotoxicity results show that cells could adhere well on the Zr-based BMG surface as in pure Ti and Zr. Lower cell proliferation rate of LM106 and LM1 is observed when compared with LM1b, which was found to be caused by Cu ion releasing rather than by Be ion. (C) 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 96B: 34-46,2011.

In Vitro Investigation of Novel Ni Free Zr-based Bulk Metallic Glasses As Potential Biomaterials

Biocompatibility of Ni-free Zr-based Bulk Metallic Glasses

In Vitro Cytocompatibility of a Zr-based Metallic Glass Modified by Laser Surface Texturing for Potential Implant Applications

In Vitro Study On Zr-Based Bulk Metallic Glasses As Potential Biomaterials

Deformation behavior, corrosion resistance, and cytotoxicity of Ni-free Zr-based bulk metallic glasses

Zr–Ti–Al–Fe–Cu bulk metallic glasses for biomedical device application

Biocompatibility of a micro-arc oxidized ZrCuAlAg bulk metallic glass

Ni-Free Zr-Based Bulk Metallic Glasses with Critical Diameter above 20 Mm

Formation and properties of biocompatible Ti-based bulk metallic glasses in the Ti–Cu–Zr–Fe–Sn–Si–Ag system

Zr–(Cu,Ag)–Al Bulk Metallic Glasses

Surface Modification and Biocompatibility of Ni-free Zr-based Bulk Metallic Glass

Glass-Forming Ability, Mechanical Properties, and Energetic Characteristics of ZrCuNiAlNbHfY Bulk Metallic Glasses

In Vitro And In Vivo Studies On Ti-Based Bulk Metallic Glass As Potential Dental Implant Material

Antimicrobial Zr-based bulk metallic glasses for surgical devices applications

The effect of Nb addition on mechanical properties, corrosion behavior, and metal-ion release of ZrAlCuNi bulk metallic glasses in artificial body fluid

Osteogenesis and angiogenesis of a bulk metallic glass for biomedical implants

Fabrication and comprehensive evaluation of Zr-based bulk metallic glass matrix composites for biomedical applications

Biodegradable CaMgZn Bulk Metallic Glass for Potential Skeletal Application

Corrosion and in Vitro Cytocompatibility Investigation on the Designed Mg-Zn-Ag Metallic Glasses for Biomedical Application

Recent Advances in Bulk Metallic Glasses for Biomedical Applications.

Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material