Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Q</i> factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Compact Dual‐mode H‐shaped Filter with Source/load Coupling for Harmonic Suppression

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

A Compact Meander Line-Resonator Hybrid Structure for Wideband Common-Mode Suppression

Novel circular dual-mode filter with both capacitive and inductive source-load coupling for multiple transmission zeros

Compact Lpf with Pair of Coupling Slots for Wide Stopband Suppression

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

Design of Compact Bandpass Filter with Improved Selectivity Using Source-Load Coupling

A Compact Dual‐band Superconducting Filter with Fine‐tuning Coupling Structure

Design of Harmonic-Suppressed Coupler with Integrated Filtering Blocks

Design of Miniaturized Microstrip Dual-Mode Filter With Source-Load Coupling

Collaborative Design of a New Dual-Bandpass 180$^{\circ}$ Hybrid Coupler

Compact High-Temperature Superconducting Filter Using Multimode Stub-Loaded Resonator

High Selectivity Quadruple‐mode Broadband Bandpass Filter with Source‐load Coupling

Miniaturized filter with harmonic suppression characteristics by embedding microstrip resonators in half‐mode substrate‐integrated waveguide resonant cavities

Periodically Nonuniform Coupled Microstrip Lines with Equalized Even- and Odd-Mode Velocities for Harmonic Suppression in Filter Design.

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Compact Low-Loss Half-Mode Substrate Integrated Waveguide Filter with Controllable Transmission Zeros.

A Compact Size Coupling Controllable Filter with Separate Electric and Magnetic Coupling Paths