Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Q</i> factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Design of Harmonic-Suppressed Coupler with Integrated Filtering Blocks

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Novel Dual-Band H-Shaped Branch-Line Coupler With Stepped-Impedance Stubs

Design of X-band Hi-Lo Microstrip Low-pass Filters

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

A Multilayer Dual-Band Coupler Based on Composite Right/left-Handed Folded Substrate Integrated Waveguide

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Compact microstrip branch-line coupler with wideband harmonic suppression

A MINIATURIZED BRANCH-LINE COUPLER WITH WIDEBAND HARMONICS SUPPRESSION

Collaborative Design of a New Dual-Bandpass 180$^{\circ}$ Hybrid Coupler

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

Compact Dual‐mode H‐shaped Filter with Source/load Coupling for Harmonic Suppression

A Lumped-Element Directional Coupler for Bandwidth Enhancement, Impedance Matching, and Harmonic Suppressions

Microstrip antenna with compact coplanar harmonic suppression structure

A Novel Harmonics-Suppression Coupled-Line Gysel Power Divider for Complex Terminated Impedances

A Compact Slow-Wave Microstrip Branch-Line Coupler with High Performance

Compact coplanar design for harmonic suppression in microstrip antenna

Design of Impedance Transforming 90 Degree Patch Hybrid Couplers

Coupled microstrip-line bandpass filters with wide upper stopband and high frequency selectivity

Design of a miniaturized 90-degree quadrature hybrid coupler with harmonic suppression ability using π-shaped lumped elements

Harmonic-Suppressed Dual-Resonance Decoupling Network With Near-Zero Insertion Loss for Patch Antenna Arrays