Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Design of Compact Bandpass Filter with Improved Selectivity Using Source-Load Coupling

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

Compact and high selectivity dual-mode microstrip BPF with frequency-dependent source–load coupling

Compact half-mode SIW bandpass filter with high-frequency selectivity

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Compact high-selectivity tunable dual-mode filter with constant bandwidth by adopting frequency-dependent S-L coupling

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Compact Lpf with Pair of Coupling Slots for Wide Stopband Suppression

Dual-Band Bandpass Filter Using Parallel Short-Ended Feed Scheme

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

A compact wide stopband microstrip bandpass filter using quarter-wavelength shorted coupled-lines

Dual band bandpass filter using coupled and series capacitors with controllable bandwidths

Design of a compact bandpass filter with multi-coupled stepped impedance resonators using LTCC technology

Miniaturized Bandpass Filter with High Selectivity and Wide Stopband Using Dual-Layer Structure