Abstract:In the process of driving, the steering, braking, and driving conditions and different road conditions affect the vibration characteristics of the vehicle in the vertical, roll, and pitch directions. These factors greatly impact the riding comfort of the vehicle. Among them, the uneven distribution of vertical load between the left and right or the front and rear suspension is one of the important factors affecting the performance indicators of the vehicle's roll angle acceleration and pitch angle acceleration. In order to improve the ride comfort of the vehicle in vertical, roll, and pitch motion, the inerter is introduced in this paper to form a new type of suspension structure with the "spring-damping" base element, inertial suspension. It breaks away from the traditional "spring-damping" base element of the inherent suspension structure. In this paper, the mechatronic inerter is taken as the actual controlled object, and the inertial suspension structure is considered as the controlled model based on the dynamic surface control theory and the pseudo-inverse matrix principle. Thus, the coordinated control of the inertial suspension can be achieved. Under random road input, compared with passive suspension, the ride comfort performance indicators of the vehicle with inertial suspension based on dynamic surface control are significantly improved. Finally, a Hardware-in-the-Loop (HiL) test of the controller based on dynamic surface control is carried out to verify that the performance of the vehicle inertial suspension using the dynamic surface control algorithm had improved in terms of vehicle ride comfort. The error between the experimental results and the simulation results is about 8%, which verifies the real-time performance and effectiveness of the dynamic surface controller in the real controller.

The development and future of vehicle suspension technologies with automatic active control

Filter-based adaptive vibration control for active vehicle suspensions with electro-hydraulic actuators

Advanced control for vehicle active suspension systems

Study on vehicle active suspension system control method based on homogeneous domination approach

Effect of time-delay feedback control on vehicle seat vibration reduction and suspension performance

Semi-Active Suspension Control Strategy Based on Negative Stiffness Characteristics

Development of a Novel Suspension System for Electric Vehicles Based on Mechanical Principles

Analysis and Experiment of Time-Delayed Optimal Control for Vehicle Suspension System

Study on Control Technology of Active Suspension Based on ADAMS and MATLAB

Simulation and Study on the Control of Vehicle Semi-Active Suspension System

Attitude Control of Vehicle Based on Series Active Suspensions

Active Control of Vehicle Suspension Systems Based on Modal Decomposition Method

Review on Vehicle Electromagnetic Suspension Technology

Vibration Suppression for Motor-Driven Uncertain Active Suspensions with Hard Constraints and Analysis of Energy Consumption

Research on time-delayed vibration reduction control of 1/4 vehicle semi-active suspension system with three degrees of freedom

Research on a novel displacement-dependent semi-active valve damping control mechanism used in the seat suspension system

Vehicle Suspension Design with Semi-Active Inerter and Semi-Active Damper Configuration

Tracking Active Control Forces by Using a Semi-Active Vehicle Suspension Integrated with Negative Stiffness

Research on Coordinated Control of Vehicle Inertial Suspension Using the Dynamic Surface Control Theory

Development of a Semi-Active Suspension Using a Compact Magnetorheological Damper with Negative-Stiffness Components

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig