Abstract:In the process of driving, the steering, braking, and driving conditions and different road conditions affect the vibration characteristics of the vehicle in the vertical, roll, and pitch directions. These factors greatly impact the riding comfort of the vehicle. Among them, the uneven distribution of vertical load between the left and right or the front and rear suspension is one of the important factors affecting the performance indicators of the vehicle's roll angle acceleration and pitch angle acceleration. In order to improve the ride comfort of the vehicle in vertical, roll, and pitch motion, the inerter is introduced in this paper to form a new type of suspension structure with the "spring-damping" base element, inertial suspension. It breaks away from the traditional "spring-damping" base element of the inherent suspension structure. In this paper, the mechatronic inerter is taken as the actual controlled object, and the inertial suspension structure is considered as the controlled model based on the dynamic surface control theory and the pseudo-inverse matrix principle. Thus, the coordinated control of the inertial suspension can be achieved. Under random road input, compared with passive suspension, the ride comfort performance indicators of the vehicle with inertial suspension based on dynamic surface control are significantly improved. Finally, a Hardware-in-the-Loop (HiL) test of the controller based on dynamic surface control is carried out to verify that the performance of the vehicle inertial suspension using the dynamic surface control algorithm had improved in terms of vehicle ride comfort. The error between the experimental results and the simulation results is about 8%, which verifies the real-time performance and effectiveness of the dynamic surface controller in the real controller.

Negative Stiffness Based Control Strategy of Vehicle Semi-Active Suspension

Semi-Active Suspension Control Strategy Based on Negative Stiffness Characteristics

Study on the Damping Characteristic of Semi-Active Torsional Damper Based on Combined Positive and Negative Stiffness

On Fuzzy Control Strategy of Nonlinear Semi-Active Suspension System

Tracking Active Control Forces by Using a Semi-Active Vehicle Suspension Integrated with Negative Stiffness

Performance Analysis of Vehicle Suspension Systems with Negative Stiffness

A semi-active suspension using a magnetorheological damper with nonlinear negative-stiffness component

Control and Simulation of Semi-Active Suspension Based on MRF Damper

Negative Stiffness Control of Quasi-Zero Stiffness Air Suspension via Data-Driven Approach with Adaptive Fuzzy Neural Network Method

Dynamic Performance Analysis of Semiactive Vehicle ISD Suspension Based on the Power-Driven-Damper Strategy

Vehicle Suspension Design with Semi-Active Inerter and Semi-Active Damper Configuration

Development of a Semi-Active Suspension Using a Compact Magnetorheological Damper with Negative-Stiffness Components

Phase deviation of semi-active suspension control and its compensation with inertial suspension

Sliding Mode Control of Semi-active Suspension Based on Reference Model

Study on the coordination control of active suspension employing linear motor based on co-simulation

Nonlinear Damping Curve Control of Semi-Active Suspension Based on Improved Particle Swarm Optimization

A novel DNFS control strategy for vehicle semi-active suspension system

Semi‐active control of air suspension with auxiliary chamber subject to parameter uncertainties and time‐delay

Simulation and Study on the Control of Vehicle Semi-Active Suspension System

Research on Coordinated Control of Vehicle Inertial Suspension Using the Dynamic Surface Control Theory

Parametric analysis of vehicle suspension based on air spring and MR damper with semi-active control