Abstract:The cohesive zone model has been applied in different computational fracture mechanical investigations. However, effects of the cohesive law on crack simulation results have not been systematically and quantitatively studied. To quantify the influence of the cohesive law, a special cohesive element has been developed and implemented into the commercial FEM code ABAQUS. The detailed computational investigation of compact tension (CT) specimens confirms that the load vs. load line displacement curve hardly depends on the initial cohesive stiffness of the cohesive zone, but the fracture parameters, such as delta(5), may deviate up to 5%. A significant difference is observed in prediction of crack propagation, which exceeds 35% for a given load line displacement in CT specimens. To diminish artificial influence of the cohesive zone model, one has to increase the specific cohesive stiffness. The J-integral as the critical energy release rate generally differs from the cohesive energy. The elastic unloading and plastic reloading around the cohesive zone affect the fracture energy amount. The difference between the cohesive energy and the critical energy release rate depends on the cohesive law as well as the ductility of the material, vanishes only in an elastic specimen and exceeds 40% for ductile materials. The discrepancy between J and the cohesive energy grows and is stagnated for the cohesive strength larger by three times the initial yield stress. To obtain realistic computational results by using cohesive zone models, one has to build the cohesive law with proper parameters. (C) 2014 Elsevier Ltd. All rights reserved.

A numerical analysis of constraint effects in fatigue crack growth by use of an irreversible cohesive zone model

Cohesive zone modelling of low cycle fatigue cracks in cracked and notched specimens

FATIGUE CRACK CLOSURE ANALYSIS UNDER TRIAXIAL STRESS CONSTRAINT

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Effect of Constraint on Cyclic Plastic Behaviours of Cracked Bodies and the Establishment of Unified Constraint Correlation

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Computational Boundary Layer Approaches for Fatigue Crack Propagation under Mixed‐mode Loading Conditions

Rate dependent cohesive zone model for fatigue crack growth

Effects of the Cohesive Law on Ductile Crack Propagation Simulation by Using Cohesive Zone Models

Critical Remarks to Cohesive Zone Modeling for Three-Dimensional Elastoplastic Fatigue Crack Propagation

Fatigue Crack-Closure Analytical Model For Considering Thickness And Hardening Effects

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

Constraint Effects on Creep Crack Growth

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

Quantification of constraint effects in elastic-plastic crack front fields

Recent Advances in Cohesive Zone Modelling of Fracture

A new creep-fatigue crack growth model and a correlation of the creep-fatigue crack growth rate with unified constraint parameter

Numerical modelling of a new FCP model and a correlation of the FCP rate with the constraint

Cyclic Plasticity and Fatigue Crack Growth

3D front tip fields in creeping solids under constraint effects: a higher-order asymptotic solution