Abstract:A line contact model of elastic coated solids is presented based on the influence coefficients (ICs) of surface displacement and stresses of coating-substrate system and the traditional contact model. The ICs of displacement and stresses are obtained from their corresponding frequency response functions (FRF) by using a conversion method based on fast Fourier transformation (FFT). The contact pressure and the stress field in the subsurface are obtained by employing conjugate gradient method (CGM) and discrete convolution fast Fourier transformation (DC-FFT). Comparison of the contact pressure and subsurface stresses obtained by the numerical method with the exact analytical solutions for Hertz contact is conducted, and the results show that the numerical solution has a very high accuracy and verify the validity of the contact model. The effect of the stiffness and thickness of coatings is further numerically studied. The result shows that the effects on contact pressure and contact width are opposite for hard and soft coatings and are intensified with the increase of coating thickness; the locations of crack initiation and propagation are different for soft and hard coatings; the risk of cracks and delaminations of coatings can be brought down by improving the lubrication condition or optimizing the non-dimensional parameter h/b h. This research offers a tool to numerically analyze the problem of elastic coated solids in line contact and make the blindness and randomness of trial-type coating design less.

Multiple Surface Cracking of Elastic Coatings Subjected to Dynamic Load

Multiple cracking of elastic coatings under transient thermal load

Periodic Antiplane Cracks in Graded Coatings under Static or Transient Loading

Multiple Surface Cracks in a Piezoelectric Layer Bonded to an Elastic Substrate under Transient Electromechanical Loads

Multiple Surface Cracking of A Piezoelectric Layer Bonded to an Elastic Substrate under Dynamic Anti-Plane Electromechanical Impacts

Multiple crack problem in nonhomogeneous composite materials subjected to dynamic anti-plane shearing

A Crack with Surface Elasticity in Finite Plane Elastostatics

STRESS ANALYSIS OF MULTIPLE SURFACE CRACKS WITH INTERACTIONS

Investigation on Periodic Cracking of Elastic Film/substrate System by the Extended Finite Element Method

Stress Analysis of Multilayered Coatings Subjected to Surface Point Contact Loading Based on Its Three-Dimensional Elastic Field Solution

The Transient Response of a Coating–substrate Structure with a Crack in the Functionally Graded Interfacial Layer

Numerical Analysis of Elastic Coated Solids in Line Contact

Transient Response of Multiple Interface Cracks in Fine-Grained Coating Composite Structures under Impact Loading

Surface Cracking of a Piezoelectric Strip Bonded to an Elastic Substrate (mode I Crack Problem)

Fracture Analysis of a Functionally Graded Coating-Substrate Structure with a Crack Perpendicular to the Interface - Part II: Transient Problem

The Dynamic Fracture Behavior of a Functionally Graded Coating–substrate System

Analysis Of Dynamic Contact Of Cracks In Viscoelastic Media

Dynamic Thermal Response of Multiple Interface Cracks between a Half-Plane and a Coating Layer under General Transient Temperature Loading

Waves scattering induced by an interface crack in a coated material

Cracks problem for non-homogeneous composite material subjected to dynamic loading

The Collinear Cracks in an Inhomogeneous Medium Subjected to Transient Load