Abstract:Utilization of sintered red mud to optimize the extraction of Al2O3 and the preparation of PAFS water purification agents is reported. The proposed process achieves a significant reduction in red mud volume, maximizes the separation efficiency of Al2O3, and converts residual aluminum and iron elements water treatment agents. The process parameters for comprehensive utilization are thoroughly investigated, along with evaluating the efficacy of fabricated PAFS materials. By employing an "alkali calcination‐water leaching" integrated extraction technique, the separation of aluminum and iron components in red mud is achieved through the extraction of aluminum oxide and the preparation of polymeric aluminum iron sulfate (PAFS) water treatment agent. Basic characteristics of raw material red mud were characterized. The process parameters of activation calcination, leaching, and preparation of water treatment agent were determined. The prepared PAFS was characterized in terms of its fundamental properties and waste water treatment capacity. Results showed that the content of Al2O3 and Fe2O3 in red mud was 12.98 % and 6.09 %, respectively, distributed in the amorphous phase, while SiO2 and CaO existed in form of feldspar, calcite, and calcium silicate. During calcination stage, use NaOH as the activation medium, over 43 % Al2O3 could be extracted under the optimal activation and leaching process parameters. After acid leaching of the water‐leached residue, PAFS water treatment agent was prepared by utilizing the resultant acid leaching solution with NaOH as PH regulator. By optimizing the process parameters for preparation, an impressive turbidity removal rate of 97.52 % was achieved for the resulting PAFS. This study presents a viable approach for achieving significant reduction and maximizing the value‐added utilization of red mud.

Phosphorus Removal Effect and Influence Factors of Red Mud

Use of Red Mud to Removal Phosphorus from Biogas Slurry Implication for Practical Application

Study on using red mud to control phosphorus release in sediment

Influencing factors of red mud for controlling phosphorus release from river sediments

Removal of phosphate from aqueous solution by red mud using a factorial design.

Evaluation of a Novel Composite Inorganic Coagulant Prepared by Red Mud for Phosphate Removal

Effect of Red Mud on Phosphorus (P) Release in Soil

Reduction of Phosphorus Release from High Phosphorus Soil by Red Mud

Extraction of Aluminum and Preparation of Polymerized Aluminum Ferric Sulfate from Red Mud

Effects of Environmental Factors on Phosphorus Removal Efficiency by Aerobic Phosphate Reduction

Characterization of Red Mud Granular Adsorbent (RMGA) and Its Performance on Phosphate Removal from Aqueous Solution

Pore-Induced Granulation of Red Soil Calcination and Its Effect of Phosphorus Removal in Water Treatment

Research of Leaching Alumina and Iron Oxide from Bayer Red Mud

Preparation and Application of Polyaluminum Ferric Sulfate from Red Mud: Behaviors of Leaching, Polymerizing, and Coagulation

A comprehensive investigation to the fate of phosphorus in full-scale wastewater treatment plants using aluminum salts for enhanced phosphorus removal

Effect of Fluidized Separating-Washing of Red Mud on Secondary Reactions of Leached Slurry with High Alumina Concentration

Study on Dealkalization and Settling Performance of Red Mud

Harmless disposal of phosphogypsum synergized red mud: Harmful element control and material utilization

A Study on the Removal Characteristics and Mechanism of Phosphorus from Simulated Wastewater Using a Novel Modified Red-Mud-Based Adsorption Material

Research on Bayer Red Mud Slurry Electrolysis

On the phosphorus-removing effect by using chemically-enhanced sediment sludge