Abstract:Utilization of sintered red mud to optimize the extraction of Al2O3 and the preparation of PAFS water purification agents is reported. The proposed process achieves a significant reduction in red mud volume, maximizes the separation efficiency of Al2O3, and converts residual aluminum and iron elements water treatment agents. The process parameters for comprehensive utilization are thoroughly investigated, along with evaluating the efficacy of fabricated PAFS materials. By employing an "alkali calcination‐water leaching" integrated extraction technique, the separation of aluminum and iron components in red mud is achieved through the extraction of aluminum oxide and the preparation of polymeric aluminum iron sulfate (PAFS) water treatment agent. Basic characteristics of raw material red mud were characterized. The process parameters of activation calcination, leaching, and preparation of water treatment agent were determined. The prepared PAFS was characterized in terms of its fundamental properties and waste water treatment capacity. Results showed that the content of Al2O3 and Fe2O3 in red mud was 12.98 % and 6.09 %, respectively, distributed in the amorphous phase, while SiO2 and CaO existed in form of feldspar, calcite, and calcium silicate. During calcination stage, use NaOH as the activation medium, over 43 % Al2O3 could be extracted under the optimal activation and leaching process parameters. After acid leaching of the water‐leached residue, PAFS water treatment agent was prepared by utilizing the resultant acid leaching solution with NaOH as PH regulator. By optimizing the process parameters for preparation, an impressive turbidity removal rate of 97.52 % was achieved for the resulting PAFS. This study presents a viable approach for achieving significant reduction and maximizing the value‐added utilization of red mud.

Evaluation of a Novel Composite Inorganic Coagulant Prepared by Red Mud for Phosphate Removal

Preparation of Coagulant from Red Mud and Semi-Product of Polyaluminum Chloride for Removal of Phosphate from Water

Novel Polyaluminum Ferric Chloride Composite Coagulant from Bayer Red Mud for Wastewater Treatment

Simple Synthesis and Excellent Coagulation Performance of a Novel Red Soil-Based Coagulant

Use of Red Mud to Removal Phosphorus from Biogas Slurry Implication for Practical Application

High‐efficiency Preparation of Fe–Al Based Flocculants from Red Mud by Microwave Selective Carbothermic Reduction and Magnetic Separation

Characterization of phosphate modified red mud–based composite materials and study on heavy metal adsorption

Extraction of Aluminum and Preparation of Polymerized Aluminum Ferric Sulfate from Red Mud

Preparation and Application of Polyaluminum Ferric Sulfate from Red Mud: Behaviors of Leaching, Polymerizing, and Coagulation

Mechanism of Red Mud Combined with Fenton'S Reagent in Sewage Sludge Conditioning

Removal of phosphate from aqueous solution by red mud using a factorial design.

A Study on the Removal Characteristics and Mechanism of Phosphorus from Simulated Wastewater Using a Novel Modified Red-Mud-Based Adsorption Material

Study on using red mud to control phosphorus release in sediment

Comprehensive Utilization of Red Mud: Current Research Status and a Possible Way Forward for Non-hazardous Treatment

Preparation of a Novel MnO2/red Mud Composites to Enhance Arsenic Removal

Red Mud-Based Polyaluminum Ferric Chloride Flocculant: Preparation, Characterization and Flocculation Performance

Application of Red Mud in Wastewater Treatment

REMOVAL OF CHROMIUM BY ENHANCED COAGULATION PROCESS USING RED MUD COMBINED WITH FERROUS SULFATE

Characterization of Red Mud Granular Adsorbent (RMGA) and Its Performance on Phosphate Removal from Aqueous Solution

Recycling of sludge residue as a coagulant for phosphorus removal from aqueous solutions

Advanced removal of phosphorus from urban sewage using chemical precipitation by Fe-Al composite coagulants