Abstract:Recent decades have seen a growing concern about ever-increasing green house gas (GHG) emissions and depletion of fossil fuels. Polygeneration, a multi-input multi-output energy system, provides huge opportunities to tackle these problems due to its superior performances over conventional energy systems in terms of energy conversion efficiency and GHG emissions. Many approaches have been made in process design and analysis of polygeneration energy systems, but most of them focus on using coal gasification as the only way to provide gas for downstream utilization. Coke oven gas, another gas source with huge capacity, however, has not received enough attention in polygeneration process design, and researches in this field are still rather limited. In this paper, we present a dual-gas sourced polygeneration process design which uses both gasification gas and coke oven gas and produces methanol, dimethyl ether (DME), and dimethyl carbonate (DMC) in an integrated catalysis procedure. Gasification gas and coke oven gas are converted to synthesis gas, or syngas, via a catalytic reforming procedure, where the ratio between carbon monoxide and hydrogen in the syngas is carefully adjusted according to specific requirements of downstream chemical synthesis reactions. An integrated catalysis procedure follows, where DME is synthesized from the fresh syngas first, unconverted syngas is then sent to a methanol synthesis unit to produce methanol, and part of the methanol is further converted to DMC in a DMC synthesis unit. Based on the proposed process design, an exergoeconomic analysis and an exergy cost distribution diagram are presented, from which the production cost of a product over each functional block of the process can be easily obtained. Analysis results show that the largest exergy loss occurs in an exothermic reformer, accounting 60.4 percent of the total exergy loss. The exergy cost distribution diagram indicates that DMC has the highest exergy cost, followed by DME and methanol, and it is economically favorable to use the exhaust gas from the chemical synthesis block for power generation.

PROCESS SIMULATION AND 3E ASSESSMENT OF THREE DIMETHYL ETHER PRODUCTION SYSTEMS IN CHINA

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Techno-Economic Analysis of Methanol to Propylene Process

Process Simulation, Thermodynamic and System Optimization for the Low-Carbon Alcohols Production Via Gasification of Second-Generation Biomass

Design and analysis for chemical process electrification based on renewable electricity: Coal-to-methanol process as a case study

Simulation and exergoeconomic analysis of a dual-gas sourced polygeneration process with integrated methanol/DME/DMC catalytic synthesis

Technical and Economic Analysis of Some Dimethyl Ether Production Technologies

Energy-environment-economy(3E) assessment of a novel low-carbon emission process integrating coal-to-methanol with green hydrogen

Study On Systems Based On Coal And Natural Gas For Producing Dimethyl Ether

Design and Analysis of a New Dimethyl Ether- Electric Power Polygeneration System

Study on Several Versions of Dimethyl Ether Production for Resolving the Natural Gas Utilization Problem in China

Emergy and life cycle assessment of polygeneration system

Design and analysis of a new DME production process with power cogeneration

How to make the production of Methanol/DME "GREENER"-The integration of wind power with coal chemical industry

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Simulation and optimization of DMC synthesis process based on conventional and advanced exergy analyses

Methanol production from natural gas reforming and CO2 capturing process, simulation, design, and technical-economic analysis

A dual-gas sourced integrated methanol/DME/DMC catalysis approach to polygeneration energy systems design and an exergoeconomic analysis

Integrated Energy-Exergy-Based Evaluation and Optimization of A Bio-Dimethyl Ether Production System Via Entrained Flow Gasification

A novel process design and techno-economic analysis for coal-based polygeneration process of synthetic natural gas, methanol and power

Comparative investigation of CO2-to-methanol process using different CO2 capture technologies