Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

The Hydrogen Storage Properties of Mg-16.5Y-13Zn(wt%)alloy

Preparation and Properties of Mg-based Hydrogen Storage Alloys for Hybrid Electric Vehicle

Hydrogen desorption properties of the MgH2-AlH3 composites

Study on Microstructure and Hydrogen Storage Properties of Mg80Ni16−xAlxY4 (x = 2, 4, 8) Alloys

Study on Hydrogenation Behaviors of A Mg-13y Alloy

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

Microstructures and hydrogen storage characteristics of nanocrystal/amorphous Mg17Al12 alloy prepared by ball-milling

Comparative Study of Solid-Solution Treatment and Hot-Extrusion on Hydrogen Storage Performance for Mg96Y2Zn2 Alloy: the Nonnegligible Role of Elements Distribution

Hydrogen Storage Properties of Mg-doped Ti 1.2 Fe Alloys Synthesized by Mechanical Alloying

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

Comparative Study for Microstructure and Hydrogen Storage Capabilities of Mg95Zn2R3 (RY, La) Alloys

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Hydrogen Storage Properties and Mechanisms of Magnesium Based Alloys with Mesoporous Surface

Comparative Investigation on the Hydrogenation/Dehydrogenation Characteristics and Hydrogen Storage Properties of Mg3ag and Mg3y

Microstructures and Hydrogen Storage Properties of As-Cast and Copper-Mould-cast LaMg4Ni Alloys

Tailoring Hydrogen Storage Properties of Amorphous Mg65Cu25Y10 Alloy Via Minor Alloying Addition of Ag

Hydrogen Storage in Mg-Ni-Type Alloys with La and Sm Incorporation

The Effect of Mg Content on Microstructure and Hydrogen Absorption Properties of Mechanical Alloyed MmNi3.5(CoAlMn)1.5–Mg

Electrochemical properties of as-cast La2-Y Mg16Ni (x = 0, 0.1, 0.2, 0.3, 0.4) alloys

Superior Hydrogen Storage Kinetics of Mg12YNi Alloy with a Long-Period Stacking Ordered Phase