Abstract:The utilization of Mg alloys for solid-state hydrogen storage has attracted considerable attention, and the Mg-based alloys with long period stacking ordered (LPSO) structure show optimized hydrogen storage properties. In this study, solid-solution treatment and hot-extrusion are utilized to modify the hydrogen storage properties of Mg96Y2Zn2 alloy. The results indicate 14H-type LPSO structure is precipitated after solid-solution treatment. Dynamic recrystallization occurs during deformation process with the refined grain size of 2 mu m approximately and the dynamic precipitation of Mg3Y2Zn3 particles leads to the aggregation of Y and Zn atoms. Hot-extrusion can enhance the pulverization resistance of Mg96Y2Zn2 alloy by increasing the lattice parameter ratio of c to a. The reduced hydrogen capacity of hot-extruded Mg96Y2Zn2 alloy is attributed to the increased pulverization resistance and decreased lattice parameters. The apparent activation energies for hydrogenation and dehydro-genation of solid-solution treated alloy are 6.86 and 13.65 kJ.mol(-1) less than those of hot-extruded alloy, respectively. The dehydrogenation temperature of solid-solution treated alloy hydride is 18 degrees C lower than that of hot-extruded alloy. More abundant and uniform distribution of Y atoms can generate accordingly more abundant and uniform YH2 nanoscale particles that embed in the alpha-Mg matrix, which contributes to faster de/hydroge-nation kinetics.

Comparative Study of Solid-Solution Treatment and Hot-Extrusion on Hydrogen Storage Performance for Mg96Y2Zn2 Alloy: the Nonnegligible Role of Elements Distribution