Abstract:Aluminum alloys are extensively used to manufacture mechanical components. However, when exposed to alkaline environments, like lubricants, refrigerants, or detergents, they can be corroded, reducing their durability. For this reason, the aim of this study is to investigate the influence of aggressive alkaline solutions (i.e., pH and presence of chlorides) on the corrosion resistance of three aluminum alloys (AA 5083-H111, AA 6082-T6, and AA 7075-T6) with and without anodizing treatments. Open circuit potential (EOCP) and anodic polarization measurements were carried out and typical corrosion parameters such as corrosion current density (icor) and corrosion rate (CR) were determined. Morphology of the corrosion attack and samples microstructure were investigated by scanning electron microscope. Results show that corrosion behavior of the three investigated alloys is influenced by (i) the aggressiveness of the testing environments; (ii) the thickness of the anodizing treatment; (iii) the alloy chemical composition; (iv) the distribution of intermetallic phases in the aluminum matrix. Moreover, three galvanic series have been built also testing other metallic alloys commonly used in mechanical applications, i.e., carbon steel (C40), stainless-steel (AISI 304), and Cu-based alloys (Cu-Ni alloy and CW 617 N, respectively). Results clearly indicate that galvanic series play a fundamental role when it is necessary to select an alloy for a specific environment, highlighting the thermodynamic conditions for corrosion occurrence. On the other hand, kinetic measurements and microstructural studies carried out on the three aluminum alloys stress the importance of the surface treatments and relevant thickness as well as the effect of metal exposure. Future work will involve the study of other surface treatments on aluminum alloys and the evaluation of their corrosion behavior in acidic environments.

Study of Fe3Al Corrosion Behavior in Simulating Marine Biofilm Environment

An electrochemical study on corrosion behavior of three alloys in artificial saliva with different pH

Anodic behavior of Fe in acidic AlCl3-EMIC ionic liquid

Study of the Corrosion Mechanism of Iron-Based Amorphous Composite Coating with Alumina in Sulfate-Reducing Bacteria Solution

Inhibiting corrosion of aluminum alloy 5083 through Vibrio species biofilm

Influence of sodium alginate and chromate on aluminum corrosion in simulated HVDC cooling water

Preparation of Superhydrophobic Coating on 5083 Aluminum Alloy for Corrosion Protection in Simulated Marine Environment Containing SRB

Engineered Living Biofilm with Enhanced Metal Binding Ability for Corrosion Protection in Seawater

Corrosion Behavior of Arc-Sprayed Pore-Sealed Zn and Al Coatings in Seawater Containing Sulfate-Reducing Bacteria (SRB)

Synergistic inhibition effect of Chlorella sp. and benzotriazole on the corrosion of Q235 carbon steel in alkaline artificial seawater

Influence of calcareous deposit on corrosion behavior of Q235 carbon steel with sulfate-reducing bacteria

Influence of Artificial Biological Fluid Composition on the Biocorrosion of Potential Orthopedic Mg-Ca, Az31, Az91 Alloys

Galvanic corrosion behavior and numerical simulation of 5083 aluminum alloy and Q235 steel in 3.5% NaCl solution

Immobilization of erosion ions in seawater by Fe-Al bimetallic hydroxide

Electrochemical Corrosion Behaviour of Microcrystalline Aluminium in Acidic Solutions

Corrosion Susceptibility of Passive Films on 1060, 2024, and 5083 Aluminum Alloys: Experimental Study and First-Principles Calculations

Corrosion Behavior of Aluminum Alloys in Different Alkaline Environments: Effect of Alloying Elements and Anodization Treatments

A comparative study of the corrosion of Q235 carbon steel in six different strains of marine-isolated sulfate reducing prokaryote

The Positive impact of biomineralization for marine corrosion protection of AA5083 alloy

Catechol/m-Phenylenediamine Modified Sol–Gel Coating with Enhanced Long-Lasting Anticorrosion Performance on 3003 Al Alloy

Copper alginate surface for perpetual Self-Polishing and Anti-Biofouling compound release