Abstract:In order to investigate the effect of solution pH on stress corrosion and electrochemical behavior of aluminum alloy with micro-arc oxidation (MAO) coating, the constant load test and <i>in situ</i> electrochemical impedance spectroscopy (EIS) had been carried out on 7050-T6 aluminum alloys (AA7050-T6) with MAO coating in 3.5 wt% NaCl solution at pH 3, pH 7 and pH 13. EIS was used to evaluate corrosion process of MAO coating and the corresponding equivalent circuit model was established. The results of EIS and mechanical properties of MAO specimens after constant load test exhibited that pH have a significant effect on the corrosion resistance and plasticity of the aluminum alloy with MAO coating. The corrosion resistance was as follows: pH 7 > pH 3 > pH 13. The loss of plasticity was as follows: pH 7 < pH 3 < pH 13. The EIS and the corroded surface morphology demonstrated that the corrosion damage was dominated by pitting corrosion in 3.5%wt NaCl solution at pH 3 and 7. General corrosion was dominant in 3.5%wt NaCl solution at pH 13. In 3.5 wt% NaCl solution at pH 3 and 7, the corrosion resistance decreased at first and then increased at the beginning of corrosion. In the middle stage, the corrosion resistance decreased at first and then stabilized. The corrosion resistance decreased again in the final stage of corrosion. In 3.5 wt% NaCl solution at pH 13, the corrosion resistance decreased at the beginning of corrosion and then increased, and the MAO coating exfoliated completely in the middle stage of corrosion.

Electrochemical Corrosion Behaviour of Microcrystalline Aluminium in Acidic Solutions

Effects of NaAlO2 on Structure and Corrosion Resistance of Microarc Oxidation Coatings Formed on AM60B Magnesium Alloy in Phosphate–koh Electrolyte

Effect of microcrystallization on pitting corrosion of pure aluminium

Electrochemical Behaviour of Microcrystalline Aluminium in Neutral Fluoride Containing Solutions

EFFECT OF MICROCRYSTALLIZATION ON PITTING BEHAVIOR OF PURE ALUMINUM

Corrosion behaviors and galvanic studies of microarc oxidation films on Al–Zn–Mg–Cu alloy

The Corrosion and Electrochemical Behaviour of Pure Aluminium in Alkaline Methanol Solutions

Observations of Anomalies in the Anodic Behaviour of Microcrystalline Aluminium

Effect of Electrolytes on the Phase Structure and Corrosion Resistance of Micro-Arc Oxidation Coatings on Aluminum

ELECTROCHEMICAL FEATURES OF THE CORROSION OF AN ALUMINUM-LITHIUM ALLOY IN 3.0% NaCl SOLUTION

Corrosion behaviour and mechanism of 6082 aluminium alloy in NaCl and Na2SO4 etchants

Effect of Electrolyte on Microstructure and Corrosion Resistance of Micro-Arc Coatings of AZ91D Magnesium Alloy

Effect of solution pH on stress corrosion and electrochemical behaviour of aluminum alloy with micro-arc oxidation coating

Study on the Corrosion Behavior and Mechanism of 6061 Aluminum Alloy under Alternating Current Interference in 3.5% NaCl Solution

A Study of the Crystallographic Pitting Behavior of Al-0.54Mg-0.66Si Aluminum Alloy in Acidic Chloride Solutions

Electro-corrosion Machining of Aluminum in Alkaline Solution and Passivated Mechanism

Electrodeposition and Corrosion Behavior of Nanocrystalline Aluminum from A Chloroaluminate Ionic Liquid

The Corrosion Behavior Research of Cr in Al-Cu Casting Aluminum Alloy at Simulated Acid Rain

Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy

Comparative Study on Electrochemical Behavior of AlLi Alloy 2 A 97 Machined Surfaces in Sodium Chloride Solution

Electrochemical Corrosion Behavior of Mg-Al Alloy with Micro-Alloying of Yttrium in a Chloride Solution