Abstract:In current five-axis computer numerical control (CNC) machining, the use of minute linear path segments as an approximation for the ideal cutter contacting (CC) point trajectory is still prevalent. However, introducing rotation axes leads to a deviation of the actual CC point trajectory from the ideal, resulting in nonlinear errors. An integrated method is proposed in this paper for compensating and correcting both the contour error, associated with the approximation of the part surface by the ideal CC point trajectory and the nonlinear error of the CC point trajectory based on the information in the CC point data. By analyzing the spatial relationship between the tool posture and the CC point path during the five-axis linear interpolation process, two adjacent machining tool positions containing CC point data information are selected as the starting and ending points of the five-axis linear interpolation machining. The ideal tool center point and the actual CC point are calculated during the interpolation process, as well as the distance and the unit vector in the perpendicular direction between the actual CC point and the ideal CC point trajectory segment. In the comprehensive error compensation and correction phase, the obtained unit vectors are used as direction vectors for error compensation, and the tool center point during interpolation is first compensated and corrected. This ensures the actual CC point and the contour curve are on the same plane. The compensation direction for contour error is calculated using the start/end tool axis vectors and the ideal CC point trajectory vectors. The size of the contour error approximating the contour curve is calculated through the chord error. A second compensation and correction are applied to the tool center point for interpolation, ultimately achieving comprehensive compensation and correction of nonlinear errors. The data calculations were conducted in the MATLAB environment using actual machining data. After compensation and correction, the contour error was reduced by 76%, the nonlinear error of the CC point trajectory decreased to below 0.88 μm, and the comprehensive nonlinear error of the CC point trajectory was reduced from 19 to 1.5 μm, a reduction of 93%. This demonstrates significant practical value in enhancing the accuracy of five-axis CNC machining. Through actual machining verification, after using the method described in this paper, the average surface roughness decreased from 1.133 to 0.220 μm, and the maximum surface roughness decreased from 6.667 to 1.240 μm. This significantly demonstrates that the compensation and correction method proposed in this paper can significantly improve the surface quality of machined parts.

CUTTING EDGE ERROR IN PRINCIPAL AXIS MATHOD FOR FIVE-AXIS MACHINING OF SCULPTURED SURFACES

An accurate surface error optimization for five-axis machining of freeform surfaces

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Geometric Error Contribution Modeling and Sensitivity Evaluating for Each Axis of Five-Axis Machine Tools Based on POE Theory and Transforming Differential Changes Between Coordinate Frames

Iso-Parametric Tool Path Planning for Five-Axis Compound Surface Machining

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

A Normal Section Plane Method for Profile Error Analysis of Five-Axis Machine Tools Based on the Ideal Tool Flank Milling Surface

Improving machined surface texture in avoiding five-axis singularity with the acceptable-texture orientation region concept

Influence mechanism of machining angles on force induced error and their selection in five axis bullnose end milling

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects

An integrated method for compensating and correcting nonlinear error in five-axis machining utilizing cutter contacting point data

A Parameter Zone Subdivision Method for Rotary Axes Motion Optimization in Five-Axis Toolpath Generation Using Inverse Evaluation Mechanism

Parametric Surface Trajectory Optimization Method of Five-axis Machining

Mechanistic Modeling of Five-Axis Machining with a General End Mill Considering Cutter Runout

A method of sensitivity analysis and precision prediction for geometric errors of five-axis machine tools based on multi-body system theory

The Cam For Complicated Cylinder Edge Shapes

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling

Tool Deflection Error Compensation in Five-Axis Ball-End Milling of Sculptured Surface

A Surface Enveloping-Assisted Approach on Cutting Edge Calculation and Machining Process Simulation for Skiving

Optimal Cutting Directions by Considering the Dynamic Mismatch Between Feed Axes of Machine Tools