Abstract:Aluminium nitride (AlN) is an important technical ceramic with outstanding strength and thermal conductivity that has important applications for advanced heat sink materials and as a reinforcement for metal-based composites. In this study, we report a novel, straightforward and low-cost method to prepare AlN powder using a vacuum tube furnace for the direct nitridation of loose aluminium powder at low temperatures (down to 500 ∘C) under flowing high-purity nitrogen. Small amounts of magnesium powder (1 wt.%), combined with aluminium, promote nitridation. Here, we characterise the effects of time (up to 12 h) and temperature (490 to 560 ∘C) on nitridation with the aim to establish an effective regimen for the controlled synthesis of an aluminium nitride reinforcement powder for the production of metal matrix composites. The extent of nitridation and the morphology of the reaction products were assessed using scanning electron microscopy and X-ray diffraction analyses. AlN was detected for all nitriding temperatures ≥ 500 ∘C, with the highest yields of 80% to 85% obtained at 530 ∘C for times ≥ 1 h. At this temperature, nitridation proceeded rapidly, and there was extensive agglomeration of the reaction products making it difficult to reprocess into powder. At lower temperatures around 510 ∘C, a relatively high proportion of AlN was attained (>73% after 6 h) while retaining excellent friability so that it could be manually reprocessed to powder. The synthesised reinforcement consisted of micro- or nano-crystalline AlN comingled with metallic aluminium. The ratio of AlN and metallic aluminium can be readily controlled by varying the nitriding temperature. This provides a flexible and accessible method for the production of AlN-reinforcement powders suited to the production of metal matrix composites.

INVESTIGAION OF TECHONOLOGY AND MECHANISM OF MANUFACTURING Al-N POWDER BY NITRIZING

Investigation of a Hot-Pressed Nb–Ti–Al Alloy: Mechanical Alloying, Microstructure and Mechanical Property

Effect of nitrogen protective atmosphere on microstructure and property of nanocomposite coating

RESEARCH ON THE PREPARATION TECHNOLOGY OF MAGNESIUM NITRIDE

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

SYNTHESIS OF ALUMINUM NITRIDE POWDER BY IN SITU REACTION

Effects of gas property on quality of NiCoCrAlY coating by cold gas dynamic spraying

Effect of heat treatment on the gas-atomized nickel‐aluminum bronze feedstock powders for cold spray

Effect of powders on aluminum nitride components fabricated by PIM

Characterization of shock waves treated aluminum nitride powder and its potential for low-temperature sintering

Effect of nitrogen flow rate on the microstructure, mechanical and tribological properties of CrAlTiN coatings prepared by arc ion plating

Hydrolysis control of AlN powders for the aqueous processing of spherical AlN granules

Mechanical Behavior and Shape Memory Effects of NixTi1‐x alloys with Tunable Mixing of Ni/Ti Powders by Laser Directed Energy Deposition

Effect of nitriding atmosphere on the morphology of AlN nanofibers from solution blow spinning

Effects of nitrogen on predominant sintering mechanism during the initial stage of high nitrogen nickel-free stainless steel powder

Investigation of the Surface Properties and Wear Properties of AISI H11 Steel Treated by Auxiliary Heating Plasma Nitriding

Impacts of Temperature and Time on Direct Nitridation of Aluminium Powders for Preparation of AlN Reinforcement

Investigation on the Microstructure and High-Temperature Properties of AlN Coating Through Oxygen Addition

Structure, Phase Composition, and Mechanical Properties of ZK51A Alloy with AlN Nanoparticles after Heat Treatment

Characterization of pre-alloyed NiTi powders produced by electrode induction-melting inert gas atomization for additive manufacturing

Kinetics analysis and enhancement mechanism of aluminum-enhanced plasma nitriding for 42CrMo steel