Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Interaction of a Phosphorus‐based FR, a Nanoclay and PA6. Part 2 Interaction of the Complete PA6 Polymer Nanocomposites

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

PA-6 and EVA alloy/clay nanocomposites as char forming agents in poly(propylene) intumescent formulations

Investigation of thermal degradation and flammability of polyamide-6 and polyamide-6 nanocomposites

Using PA6 As a Charring Agent in Intumescent Polypropylene Formulations Based on Carboxylated Polypropylene Compatibilizer and Nano‐montmorillonite Synergistic Agent

Flammability and phase-transition studies of nylon 6/montmorillonite nanocomposites

A Novel Phosphorous-Containing Polymeric Compatibilizer: Effective Reinforcement and Flame Retardancy in Glass Fiber Reinforced Polyamide 6 Composites

Influences of nanoclays on the flame retardancy of fiber-filled and unfilled polyamide-6 with and without aluminum diethylphosphinate

Effect of the Phosphorus–Nitrogen-Containing Quaternary Ammonium Salt Structure on the Flammability Properties of Poly(methyl Methacrylate)/montmorillonite Nanocomposites

Preparation and Properties of Halogen-Free Flame-Retarded Polyamide 6/organoclay Nanocomposite

Thermal degradation and flame retardancy of nylon 6/aluminum methylmethoxy phosphonate composites

Preparation and Properties of Toughened/flame‐retardant PA6/glass‐fiber Composites Reinforced by Linear Polyphosphazene Elastomers

A phosphorus-containing flame retardant with thermal feature suitable for polyamide 6 and its filaments with enhanced anti-dripping performance

Flame retardant polyamide 6/nanoclay/intumescent nanocomposite fibers through electrospinning

Polymer-type flame retardants based on a DOPO derivative for improving the flame retardancy of polyamide 6: Preparation, properties and flame retardancy mode of action

Rubber toughened flame retardant (FR) polyamide 11 nanocomposites Part 2: synergy between multi-walled carbon nanotube (MWNT) and MMT nanoclay

Flame retardancy, thermal, and mechanical properties of flame retardant PA6/SGF and PPS/PA6/SGF composites

Thermal degradation and combustion behaviors of flame retarded glass fiber reinforced polyamide 6 composites based on cerium hypophosphite

Flame retardancy and mechanical properties of polyamide 6 modified by multiple reactions with furan-phosphamide