Abstract:Polyvinyl chloride (PVC) is the most widely used general flame-retardant plastic worldwide; however, the large number of plasticizers added during processing significantly reduces its flame-retardant property. To prepare a new type of PVC material with highly efficient flame retardancy and smoke suppression, antimony trioxide (Sb2O3), talc powder, hydromagnesite, and zinc borate were added in different proportions to PVC to explore the flame-retardant properties, thermal weight, smoke density (Ds), and mechanical properties of the composite materials. Results showed that the limiting oxygen index value of each group was higher than 27% after adding talc powder, magnesite, and zinc borate to replace part of the Sb2O3. This value was within the refractory-grade level and indicated a good flame retardancy performance. The replacement effect was in line with the experimental expectation. The lowest Ds peak value was 656.4 when the flame retardants were added with 10 wt% Sb2O3, 50 wt% hydromagnesite, 20 wt% talc, and 20 wt% Zn3BO6. Compared with pure Sb2O3 as a flame retardant, the Ds peak value decreased by 46.7%. The thermogravimetric decomposition temperature of the composites in each group was generally higher than that of the group with pure Sb2O3 as a flame retardant, increasing by 45.3 °C. The thermal stability of the composites was improved, and the elongation at the break and tensile strength were 234.9% and 25.8 MPa, respectively, indicating good mechanical properties. The results showed that using compound flame retardants to replace most of the Sb2O3 is an effective technique for obtaining good flame retardancy and mechanical properties of PVC. This study, not only reduced the manufacturing cost of flame-retardant PVC, but also effectively reduced its smoke density and the time to reach the highest smoke density, which provided a research reference for the application and promotion of flame-retardant PVC.

Flame Retardant Flexible Poly(vinyl Chloride) Compound for Cable Application

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

Study on Controlled Synthesis of Zinc Carbonate Via Mixed Template and Hydroxystannate-coated Calcium Its Flame Retardancy in PVC

Mechanical Properties and Thermal Degradation of Flame Retardant PC/HDPE Blending with Spirocyclic Hydroxybenzene Phosphate

A Novel Zinc Chelate Complex Containing Both Phosphorus and Nitrogen for Improving the Flame Retardancy of Low Density Polyethylene

Simultaneously enhanced flame retardancy and smoke suppression properties of flexible polyvinyl chloride with the incorporation of modified Mg(OH) 2 and Sb 2 O 3

Improving the flame retardancy and smoke suppression of flexible PVC by incorporating zinc borate‐modified diantimony trioxide

Enhanced flame retardancy and thermal stability of zinc borate and magnesium carbonate as a promising alternative for Sb2O3 toward polyvinyl chloride

The Flame Retardancy and Smoke Suppression Performance of Polyvinyl Chloride Composites with an Efficient Flame Retardant System

Chitosan-regulated inorganic oxyacid salt flame retardants: preparation and application in PVC composites

Achieving Enhanced Fire Safety of Polyvinyl Chloride Through Rapid Catalytic Carbonization Using a Triple-effect Flame Retardant of Mg(OH)2-ZnO-TiO2

Preparation of Zinc Hydroxystannate Coated Dendritic-Fibrillar Barium Carbonate and Its Flame Retardant Effect on Soft Poly (vinyl Chloride)

RETRACTED ARTICLE: Preparation of Multilayers Zinc Hydroxystannate Microcapsules and its Application in Flame-Retardant PVC Composites

Synthesis of Core/Shell Structured Zinc Borate/Silica and Its Surface Charring for Enhanced Flame Retardant Properties

A Novel Method To Prepare Zinc Hydroxystannate-Coated Inoraanic Fillers And Its Effect On The Fire Properties Of Pvc Cable Materials

Recent Advances in Halogen-Free Flame Retardants for Polyolefin Cable Sheath Materials

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

An Overview of the Flame Retardants for Poly(vinyl chloride): Recent States and Perspective †

Development of a UiO-66 Based Waterborne Flame-Retardant Coating for PC/ABS Material

Self‐emulsification synthesis of epoxy phosphate ester and its flame‐retardant mechanism in flexible poly(vinyl chloride)/magnesium hydroxide composites

Effect of crystalline phase formed by compound flame retardant on the flame retardancy and ceramization of polyethylene composites