Abstract:Spent nuclear fuel (SNF) from modern light water or thermal reactors containing uranium oxide with small concentrations of plutonium and other actinide oxides is converted into metal by the electrolytic reduction. The obtained metal must be subjected to further processing (electrorefining). This review reflects the achievements in development SNF electrolytic processing, concepts of the technological operations, and a model describing the electrochemical process. The technological scheme for the electrochemical reduction of SNF and MOX fuel is considered. The complexity of a carbon anode application in the process of UO2 electrolytic reduction is reflected. The reduction processes of alkali, alkaline earth (AE), and rare earth metal oxides as well as oxide compounds of zirconium are demonstrated. The reduction of lanthanum oxide and oxy‐chloride to the metallic form by adding metallic nickel to the molten salt is discussed. The solubility of Li2O in molten salts is interpreted depending on the amount of dissolved alkali and AE metal chlorides. The considered pyroprocessing technology enables a much greater release of the energy accumulated in uranium ore, and recycling all actinides allows reducing significantly the amount of nuclear waste and the time it must be isolated. Current density distribution in a LiCl + 2 wt.% Li2O melt during electrolytic reduction of SNF in a laboratory electrolyzer. The cathode with the basket for the loaded SNF is located in the center of the electrolyzer, and the anodes, protected by ceramic sheaths, are located on the left and right. The maximum current density is found near the small holes in the sheaths and at the top of the cathode.

Reduction of U(VI) and some fission products in HNO3 media by galvanostatic electrolysis

An Efficient Elution Method of Tetravalent Uranium from Anion Exchanger by Using Formic Acid Solution

Study on valence of Pu, Np and Tc in nitric acid after electrolytic reduction

Study on Reduction of Neptunium and Uranium in Nitric Acid Solution Using Flow Type Electrolytic Cell, As a Basic Technique for Advanced Reprocessing Process

HYDROXYLAMINE DERIVATIVE IN PUREX PROCESS. VI. STUDY ON THE PARTITION OF URANIUM/NEPTUNIUM AND URANIUM/PLUTONIUM WITH N,N-DIETHYLHYDROXYLAMINE IN THE PURIFICATION CYCLE OF URANIUM CONTACTOR

Development of a New Aqueous Process for Nuclear Fuel Reprocessing: Hot Tests on the Recovery of U and Pu from a Nitric Acid Solution of Spent LWR Fuel

Recovery of actinides and fission products from spent nuclear fuel via electrolytic reduction: Thematic overview

Preparation of Γ-Uranium-molybdenum Alloys by Electrochemical Reduction of Solid Oxides in LiCl Molten Salt

Development of an Advanced Ion Exchange Process for Reprocessing Spent Nuclear Fuels

Co-processing of uranium and plutonium for sodium-cooled fast reactor fuel reprocessing by acid split method for plutonium partitioning without reductant

U(VI) Extraction by 8-Hydroxyquinoline: a Comparison Study in Ionic Liquid and in Dichloromethane

Nitrate Conversion and Supercritical Fluid Extraction of Uo2-Ceo2 Solid Solution Prepared by an Electrolytic Reduction-Coprecipitation Method

Secondary metal ion-induced electrochemical reduction of U(VI) to U(IV) solids

Fast Uranium Electro-Extraction Through Synergistic Hydrophilic Channel and Modulating Local Interfacial Species

Electrochemical and spectrochemical analysis of U(VI) reduction in nitric acid solutions

Head-End Dissolution for UC Processes and UC-PuC Reactor Fuels

Efficient photoreduction strategy for uranium immobilization based on graphite carbon nitride/perovskite oxide heterojunction nanocomposites

Electrochemical Electron Transfer and Crystallization Process of Uranium (vi) in Sodium Salt Solution

Uranium (VI) Reduction by Denitrifying Biomass

Removal And Recovery Of Uranium From Groundwater Using Direct Electrochemical Reduction Method: Performance And Implications

Securing Reversibility of UVO2+/UVIO22+ Redox Equilibrium in [emim]Tf2N‐Based Liquid Electrolytes towards Uranium Redox‐Flow Battery