Abstract:In the present paper, a new simulation method is developed for unsteady cavitating flow with air ventilation, which is very useful for alleviating the pressure oscillation in hydroturbine draft tube and reducing the drag force on an underwater vehicle. Because the fluid includes three components, i.e., the water, vapor, and air, the interactions between water–air and water–vapor are treated by applying the level set method, and the effect of surface tension is taken into account in governing equations. Further, the phase change between the water and the vapor is modeled by a homogeneous model, where the effect of air injection is considered by applying the air volume fraction in the mass transport equation. For calibration, the cavitating flows around a cylinder vehicle were simulated using the proposed method, and the numerical results were compared with the experimental data at three different ventilation conditions. The good agreement of cavitation evolutions between the simulation and the experiment indicated that the proposed method was acceptable for the simulation of ventilated cavitating flows with nature cavitation and would be usable for various engineering applications. Moreover, the vorticity analysis depicts that the vortex is closely related to cavitation evolution, and air injection much changes the vorticity production in cavitating flow. It was also revealed that vorticities only occurred in regions with high vapor/air volume fraction and the vortex stretching term created the most vorticities.

Flow Field Simulation and Performance Analysis for a Supercavitation Vehicle

A Thrust Test Method for Water Ramjet Engine

ACTIVE FLOW CONTROL APPLICATIONS WITH ZERO NET MASS FLUX ACTUATOR IN FLOW FIELD OF SUPERSONIC INLET

Design Method of Water Jet Pump Towards High Cavitation Performances

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Numerical study of the hydrodynamic performances of surface piercing propeller

Investigations into the unsteady internal flow characteristics for a waterjet propulsion system at different cruising speeds

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

NUMERICAL INVESTIGATION OF THE VENTILATED CAVITATING FLOW AROUND AN UNDER-WATER VEHICLE BASED ON A THREE-COMPONENT CAVITATION MODEL

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

Design of Contra-Rotating Waterjet Pump Based on High Cavitation Performances

Numerical Simulation of the Horizontal Water-Entry Process of High-Speed Vehicles

Cavitating Flow Analysis and Design Optimization for a Waterjet Mixed Flow Pump

Numerical Simulation of High-Speed Jet Flow Field of Underwater Jet Propulsion Craft

Non-Equilibrium Molecular Dynamics Simulation for Mechanism and Drag Reduction of Underwater Supercavitation in Open System

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

Numerical Simulation on the Cavitation Flow of High Speed Oblique Water Entry of Revolution Body

Numerical analysis of cavitation and impact load characteristics of supercavitating vehicle entering water at high speed

Numerical Analysis on Self-Propulsion of a Waterjet-Propelled Ship with Different Propulsion Models

Numerical investigation of cavitation-vortex interaction in a mixed-flow waterjet pump

Hydrodynamic Design of an Advanced Submerged Propulsion