Abstract:In order to solve the problem of coal dust pollution at the transfer point, a three-dimensional numerical model of wind flow-coal dust at the loading point of underground rubber run was established by computational fluid dynamics (CFD) discrete particle model and finite element method and k-ε turbulence model, and the coal dust diffusion pollution phenomenon caused by the coal flow transfer under the intersection of wind flow in the cross tunnel was studied. Based on the simulation results of wind flow velocity contour, pressure contour and isochronous flow vector distribution, the influence mechanism of wind flow and coal dust characteristics on the distribution of wind flow and coal dust diffusion in the roadway is analysed, and a dust control and reduction system and treatment scheme with new pneumatic screw spray technology as the core is proposed to suppress coal dust pollution at the reloading point. The results of the study show that the wind flow distribution is mainly influenced by the intersection of tape traction and cross-roadway wind flow, showing a complex multi-layer distribution along the roadway and in the normal direction; the diffusion of coal dust of different particle sizes is influenced by the roadway wind flow, and coal dust with particle sizes in the range of 10μm~20μm is more easily diffused, and the dust with particle sizes in the range of 20μm~45μm is mainly collected and suspended near the vortex wind flow at the cross-roadway. The coal dust in the range of 20 μm~45 μm is more likely to gather in the vortex; the treatment system effectively controls the coal dust inside the dust cover, and the spiral-shaped transported droplet particle group formed by the pneumatic spiral spray combines with it efficiently, which verifies the dust control and reduction effect of the pneumatic spiral spray system at the transfer point, and the dust removal efficiency reaches 89.35%~93.06%, which provides relevant theoretical support for the treatment of dust pollution at the coal transfer point in underground coal mines It provides the theoretical support and means to control dust pollution at underground coal transfer points.

Flow simulation and optimization on a new technic used to control dust from cold-rolled strip

Numerical Simulation of flow characteristics in a new-type multistage nozzle of pressure drop

Optimal blowing parameter research of compressible flow controlling dust from cold rolled strips

Experimental Study on Iron Oxide Scales Pollution Control by A Spurt and Suction Technique

CFD Modeling of Ventilation and Dust Flow Behavior in Polishing and the Design of an Innovative Wet Dust Removal System

Numerical Simulation on Flow Field in a New Integrative Device for Dust Removal and Desulphurization

Flow Field Analysis and Structure Optimization of Vacuum Sweeper Suction Mouth

Research on the mechanism of multilayer spiral fog screen dust removal at the comprehensive excavation face

Optimization of wind-and-water coordinated dust reduction device for coal mine return airway based on CFD technology

Experiment and Simulation of Liquid Film Flow Driving Abrasive Particle Dispersion on the Surface of a Rotating Disk

Numerical Analysis of the Dust Control Performance of a Counter-current Swirling Configuration in the Flash Ironmaking Reactor

Research on the Wet Shot Blasting Technology of Strip Steel Surface Topography and Finite Element Simulation

Computational Fluid Dynamics Analysis of Wet Dust Removal in High-Gravity Countercurrent Rotating Packed Bed

Simulation for the Design of Dust Suction System of Highway Sweeper

Numerical simulation and experimental study of strip steel jet cooling

CLOSED TO STREAMLINE NUMERICAL SIMULATION ON COMPLICATED STRUCTURAL NOZZLE JETS IN FURNACE FLOW FIELD

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating

Simulation and Optimization of Fan System for Road Sweeper

Study on coal dust diffusion law and new pneumatic spiral spray dedusting technology at transfer point of mine cross roadway.

Simulation and Optimization of the Nozzle Section Geometry for a Suspension Abrasive Water Jet

Numerical Simulation of a New Horizontal Spray Tower for Sintering Flue Gas Desulfurization