Abstract:Controlling the distribution of the abrasive grains on the surface of the grinding tools in an appropriate way is important for improving the quality of grinding processing and meeting the workpiece precision requirements. In the present study, a novel method for the orderly arrangement of abrasive particles is proposed by using the liquid film flow on the surface of the rotating disk as the driving and controlling means for the uniform dispersion and position arrangement of abrasive particles. Computational fluid dynamics (CFD) simulations have been performed to clearly illustrate the trajectories of abrasive particles under the strong influence of liquid film flow on the rotating disk and reveal the effects of fluid flow, disk rotational motion, and the mixture viscosity on the particle distribution. A new abrasive grain arrangement device is designed and fabricated using this novel method. The operating parameters such as liquid volume flow rate, disk rotational speed, and liquid viscosity are adjusted to control the placement of abrasive grains on the surface of the grinding tool. An image processing tool is used to examine and analyze the arrangement results. The experimental results indicated that the application of the liquid film flow on a rotating disk to the abrasive grain arrangement can improve the arrangement of abrasive grains and get rid of the dependence on the template.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to achieve the orderly arrangement of abrasive particles on the surface of a rotating disk through liquid film flow, thereby improving the quality and precision of grinding processing. Specifically, traditional grinding tools have randomness in abrasive particle distribution, resulting in abrasive particle layering and aggregation phenomena. Only some of the abrasive particles participate in the actual grinding process, while the remaining abrasive particles generate heat through friction, which may cause serious adverse effects, such as abrasive wear, residual stress, and grinding burns. Therefore, controlling the position of abrasive particles on the surface of the grinding tool is crucial for improving grinding performance and tool life. To solve this problem, the author proposes a new method, using the liquid film flow on the rotating disk as a driving means to achieve the uniform dispersion and orderly arrangement of abrasive particles. This method does not require the use of templates but controls the distribution of abrasive particles by adjusting operating parameters such as liquid flow rate, disk rotation speed, and liquid viscosity. In addition, the author has also designed and manufactured a new type of abrasive particle orderly arrangement device and verified the effectiveness of this method through experiments. ### Key innovation points: 1. **No template required**: Traditional methods rely on preset templates to achieve the orderly arrangement of abrasive particles, while the method proposed in this paper does not require templates, simplifying the process flow. 2. **Liquid film flow drive**: Use the liquid film flow on the rotating disk as a driving force to make the abrasive particles form a uniform and orderly distribution on the disk surface. 3. **Parameter regulation**: By adjusting parameters such as liquid flow rate, disk rotation speed, and liquid viscosity, the arrangement of abrasive particles can be precisely controlled. ### Experiments and simulations: To verify the effectiveness of this method, the author carried out computational fluid dynamics (CFD) simulations and designed corresponding experimental devices. The flow state of the liquid film on the rotating disk was observed by a high - speed camera, and the arrangement results of abrasive particles were analyzed using image processing tools. The experimental results show that this method can significantly improve the arrangement effect of abrasive particles and improve the quality of grinding processing. ### Conclusion: This research provides a novel and effective method for abrasive particle arrangement, which can improve the quality and precision of grinding processing and avoid dependence on templates at the same time. This method is expected to improve grinding efficiency in industrial applications and has important practical significance.

Experiment and Simulation of Liquid Film Flow Driving Abrasive Particle Dispersion on the Surface of a Rotating Disk

Preliminary Study of Disc Hydrodynamic Polishing

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Numerical analysis and experiment of abrasive flow machining microhole structure based on CFD-DEM coupling

Numerical Simulation Analysis of High-precision Dispensing Needles for Solid-liquid Two-phase Grinding

Machinability evolution of gas–liquid-solid three-phase rotary abrasive flow finishing

Numerical Simulation Analysis of Four-Step Variable-Diameter Pipe by Solid-Liquid Two-Phase Grinding

Novel Disc Hydrodynamic Polishing Process and Tool for High-Efficiency Polishing of Ultra-Smooth Surfaces

Improvement of process repeatability and resolution in abrasive air jet machining via viscous slurry entrainment

Numerical Simulation Analysis of Complex Variable Diameter Pipe Polishing by Solid-liquid Two-phase Abrasive Flow

Modeling and experimental investigation of useful flow-rate in flood delivery grinding

Numerical Analysis of Solid-Liquid Two-Phase Abrasive Flow in Microcutting Polycrystalline Materials Based on Molecular Dynamics

Numerical Simulation and Experimental Researches on Different Abrasive Grain Arrangements of Monolayer Diamond Grinding Tools Fabricated by HFCVD Method

Simulation and Experimental Research on Airflow Movement Characteristics of Grinding Zone

Modeling and simulation for material removal in abrasive jet precision finishing with wheel as restraint

Granular surface flow in a two-dimensional rotating drum: Particle dynamics simulation

Study on the surface forming mechanism of the solid–liquid two-phase grinding fluid polishing pipe based on large eddy simulation

The Effect Of Process Parameters On Surface Roughness In Abrasive Jet Finishing With Grinding Wheel As Restraint

Particle collision-based abrasive flow mechanisms in precision machining

Modeling of solid–liquid coupling and material removal in robotic wet polishing

Control Mechanism of Particle Flow in the Weak Liquid Metal Flow Field on Non-Uniform Curvature Surface Based on Lippmann Model