Abstract:Abrasive flow machining method is a new precision processing method. Unlike the traditonal mechanical processing, the biggest feature of this technology is its polishing liquid. Because of the rheological properties of the polishing liquid, it can enter into any complex and tiny flow channels without limitation. In addition, according to the size and structure of the machined parts, the suitable polishing fluid can be simply and effectively configured. In the abrasive flow machining process, the inlet velocity is the main parameter affecting the processing efficiency and accuracy of the abrasive flow. Therefore, the inlet velocity is selected as the processing parameter to study the processing effect of the abrasive flow on the part. At present, most of the research content about abrasive flow processing is mainly focused on the machine parameters and abrasive configuration, while the particles decisive role in the whole process was ignoring. The essence of abrasive flow processing is the shear, collision, and friction between the innumerable particles and the processed surface,,so it is great significance to study the distribution and mechanical properties of particles. Based on the above background, the micro-component dispensing head is selected as the simulation and test object in this paper. With the abrasive flow machining technology and the combination of CFD( computational fluid dynamics) and DEM(discrete element method), the fluid simulation software FLUENT was used to perform the numerical analysis of the abrasive flow machining process, and the distribution of fluids and particles during processing were discussed, the distribution of fluids and particles under different inlet velocity conditions was compared and analyzed, the micro-cutting behavior of the abrasive flow machining was revealed. The collision model of the particles impact the processed surface was established. The effect of the abrasive flow on processed surface and the material removal mechanism were clarified. Numerical simulations showed that, with the increase of the inlet velocity, the effects of fluids and particles on the processed surface were enhanced, the friction and collision between the particles and the surface were severer, more kinetic energy of the particles was converted into cutting energy, and the removal rate of the material was improved. The collision model showed that the removal of the surface material was achieved by continuous impact and shear of the particles. The NT100 grating measuring instrument and scanning electron microscope were used to detect the surface topography after the abrasive flow processing. The test results showed that the surface roughness decreased from 2.03μm to 0.65μm., the surface roughness was significantly lower than that before processing, and the surface quality was obviously improved. The study provides a reference for further research on abrasive flow processing and micro-cutting.

Theoretical and Experimental Investigation on a Novel Cavitation-Assisted Abrasive Flow Polishing Method

Preliminary Study of Disc Hydrodynamic Polishing

Novel cavitation fluid jet polishing process based on negative pressure effects

Numerical and experimental study on cavitation enhancement of ultrasonic coupled abrasive jet polishing

Acceleration mechanism of abrasive particle in ultrasonic polishing under synergistic physical vibration and cavitation: Numerical study

Abrasive Jet Polishing Utilizing the Synergistic Effect of Ultrasonic Pulse-Cavitation and Process Optimization Research

Numerical and experimental investigation on the material removal profile during polishing of inner surfaces using an abrasive rotating jet

Theoretical Modeling Method for Material Removal Characteristics of Abrasive Water Jet Polishing under Rotating Oblique Incidence

Particle collision-based abrasive flow mechanisms in precision machining

Towards an Understanding of Multiphase Fluid Dynamics of a Microfluid Jet Polishing Process: A Numerical Analysis

Numerical Modeling and Experimental Study on the Material Removal Process Using Ultrasonic Vibration-Assisted Abrasive Water Jet

An Experimental Study of the Nanoparticle Colloid Hydrodynamic Cavitation Jet Polishing Performance under Different Nozzle Designs

CFD Modeling of Ventilation and Dust Flow Behavior in Polishing and the Design of an Innovative Wet Dust Removal System

Machinability evolution of gas–liquid-solid three-phase rotary abrasive flow finishing

Research on Abrasive Water Jet Polishing of Silicon Carbide Based on Fluid Self-Excited Oscillation Pulse Characteristics

Numerical analysis and experiment of abrasive flow machining microhole structure based on CFD-DEM coupling

Fundamental Study of Phased Array Ultrasonic Cavitation Abrasive Flow Polishing Titanium Alloy Tubes

Design, Testing, and Experimental Validation of a Rotary Vibration-Assisted Polishing Device (RVAPD) for Enhanced Machining and Surface Quality

Novel Disc Hydrodynamic Polishing Process and Tool for High-Efficiency Polishing of Ultra-Smooth Surfaces

Optimization of the Morphology of the Removal Function for Rotating Abrasive Water Jet Polishing

Research on a new method for optimizing surface roughness of cavitation abrasive flow polishing monocrystalline silicon