Abstract:To develop novel mineral-filled composites and assess their enhanced properties (stiffness, a good balance between mechanical strength and impact resistance, greater temperature stability), a high-impact polypropylene copolymer (PPc) matrix containing an elastomeric discrete phase was melt mixed with natural CaSO4 β-anhydrite II (AII) produced from gypsum rocks. First, in a prior investigation, the PPc composites filled with AII (without any modification) displayed enhanced stiffness, which is correlated with the relative content of the filler. The tensile and impact strengths dramatically decreased, especially at high filling (40 wt.%). Therefore, two key methods were considered to tune up their properties: (a) the ionomeric modification of PPc composites by reactive extrusion (REx) with zinc diacrylate (ZA), and (b) the melt mixing of PPc with AII surface modified with ethylenebis(stearamide) (EBS), which is a multifunctional processing/dispersant additive. The properties of composites produced with twin-screw extruders (TSEs) were deeply assessed in terms of morphology, mechanical, and thermal performance, including characterizations under dynamic mechanical solicitations at low and high temperatures. Two categories of products with distinct properties are obtained. The ionomeric modification by Rex (evaluated by FTIR) led to composites characterized by remarkable thermal stability, a higher temperature of crystallization, stronger interfacial interactions, and therefore noticeable mechanical properties (high tensile strength (i.e., 28 MPa), increased stiffness, moderate (3.3 kJ/m2) to good (5.0 kJ/m2) impact resistance) as well as advanced heat deflection temperature (HDT). On the other hand, the surface modification of AII with EBS facilitated the dispersion and debonding of microparticles, leading to composites revealing improved ductility (strain at break from 50% to 260%) and enhanced impact properties (4.3–5.3 kJ/m2), even at high filling. Characterized by notable mechanical and thermal performances, high whiteness, and a good processing ability, these new PPc–AII composites may be tailored to meet the requirements of end-use applications, ranging from packaging to automotive components.

Mechanical Properties of PPS/PC/GF/Nano-CaCO3 Hybrid Composites

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Mechanical and Thermal Properties Modeling, Sorption Characteristics of Multiscale (Multiwalled Carbon Nanotubes/Glass Fiber) Filler Reinforced Polypropylene Composites

Study on the Preparation and Properties of Caco3/Polypropylene Composite Materials

Mechanical Properties and Morphology of Poly(L-Lactic Acid)/Nano-Caco3 Composites

Mechanical and thermal properties improvement of nano calcium carbonate-filled epoxy/glass fiber composite laminates

Calcium Carbonate Particles Filled Homopolymer Polypropylene at Different Loading Levels: Mechanical Properties Characterization and Materials Failure Analysis

Impact of hybrid nanofillers on the structure and property of polypropylene/polystyrene composites based on elongation flow

Mechanical behavior of carbon/glass polypropylene hybrid composites

Balancing the Strength–Impact Relationship and Other Key Properties in Polypropylene Copolymer–Natural CaSO4 (Anhydrite)-Filled Composites

Mechanical and Viscoelastic Properties of Nanoclay Filled Bamboo/Glass Fibre Reinforced Unsaturated Polyester Hybrid Composites

Electrical Resistivity, Crystallization and Mechanical Properties of Polypropylene/Multi-Walled Carbon Nanotube/Calcium Carbonate Composites Prepared by Melt Mixing

The synergistic effects of micro-and nano-fillers on the properties of polyamide 11/poly (lactic acid) blend

Influence of polypropylene fibers on the tensile mechanical properties of calcium silicate hydrate: molecular simulation

Effects of carbon‐based nanoparticles on the properties of poly(lactic acid) hybrid composites containing basalt fibers and carbon‐based nanoparticles processed by injection molding

Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam

Effect of Surface Modification of CaCO_3 on Mechanical Properties of PP/CaCO_3 Composite

Toughening and Heat-Resistant Modification of Degradable PLA/PBS-Based Composites by Using Glass Fiber/Silicon Dioxide Hybrid Fillers

High-performance Polyphenylene Sulfide Composites with Ultra-High Content of Glass Fiber Fabrics

Network structural hardening of polypropylene matrix using hybrid of 0D, 1D and 2D carbon-ceramic nanoparticles with enhanced mechanical and thermomechanical properties