Abstract:Summary Material properties and geometrical shape of rolled products are two of the most important problems in steel product, which are affected by the thermal distribution and deformation behavior during rolling. Analysis of the behavior of medium plate during multi-pass rolling is significant for guiding the production. Recently years, the finite element method (FEM) has been widely used for analyzing the plate rolling processes, which has become an irreplaceable theory method. Rolling processes is a kind of continuous metal forming technology. Through multi-pass rolling processes, the shape and microstructure of plate could be obtained. However, in mostly works, the researchers focused on analysis of behavior of plates in a single pass, which the deformation of plate in previous passes are neglected. Itis obviousthatmore helpfulmassagescouldbeobtainedtoanalyze the behavior of plate deformation behavior in continuous multi-pass rolling processes. In this paper, a three-dimensional thermal-mechanical finite element model is established for simulation of the continuous deformation behavior of medium plate during multi-pass rolling processes coupled with explicit dynamic FEM, implicit FEM and updating geometrical method. Firstly, establishand solve thethermo-mechanical FE model of the i pass. Then obtain the thermal distribution on plate and obtain the plate shape after the i pass using the updating geometrical method. And establish and solve the thermal distribution of plate between the i pass and the i+1 pass. The thermal distribution in plate, the plate shape, etc, during rolling in the i pass are obtained. Modify the rolls gap and metrical parameters, the FE model of the i+1 pass could be established with the geometrical model and thermal distribution when i < N. With the same method, the following passes could be simulated. The plate view pattern, the thermal distribution, the maximum temperature on slab surface, the minimum temperature on slab surface and the mean temperature on slab surface each pass in the rolling processes were obtained. The calculated results are compared with the actual results, which are in good agreement. The model could be used in the hot working process.

Temperature Prediction of Seven-Pass Finishing Rolling of Hot Thin Strips by Fem

Study on Temperature Model and Self-Adaption for Finishing Stands of Hot Strip Mill

Prediction and analysis of rolling process temperature field for silicon steel in tandem cold rolling

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills

Multi-pass Medium Plate Rolling Processes Using Thermo-mechanical FE Analysis

Temperature modeling and analysis of transfer bar using hot coil box technology

Analytical model for temperature prediction of hot-rolled strip based on symplectic space Hamiltonian system

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

FEM simulation of thermo-mechanical stress and thermal fatigue life assessment of high-speed steel work rolls during hot strip rolling process

Numerical Evaluation of a High Speed Steel Work Roll During Hot Strip Rolling Process

Numerical Simulation of Plate Temperature Distribution During Hot Rolling

Numerical Simulation of the Eddy Current and Temperature Fields in the Edge Heating Hot Strip Mill

Finite Element Analysis of Temper Rolling Process

Novel analytical heat source model for cold rolling based on an energy method and unified yield criterion

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

Prediction of Velocity and Deformation Fields During Multipass Plate Hot Rolling by Novel Mixed Analytical-Numerical Method

Generalized Mathematical Model for Hot Rolling Process of Plate

A New Control Volume-Based 2d Method for Calculating the Temperature Distribution of Rod During Multi-Pass Hot Rolling

3D Eddy Current and Temperature Field Analysis of Edge Induction Heater

Numerical Computation of Coupled Electromagnetic-Thermal Field in an Induction Edge Heater for the Hot Strip Mill

Numerical Simulation of Multi-Pass Hot Rolling of TA1/Q235B Clad Plates