Abstract:We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either ceramic glue or low-temperature melting glass. The fabrication procedure allows the protection of the cleaved optical fiber end faces, which serve as the two mirrors of the FPI, from damage, thus ensuring the high visibility of the FPI sensor. The FPI's complete openness permits the analyte of interest fluids to flow smoothly into the cavity and interact directly with the light, obviating the need for additional assistance. The fabrication experiment demonstrates that the fabrication procedure can readily achieve a visibility of over 20 dB. Refractive index testing indicates that the sensor exhibits a sensitivity of over 1116 nm/RIU within the range of 1.334-1.375. A comparison of temperature investigations indicates that the fully open cavity FPI fabricated by bonding with low-temperature melting glass exhibits relatively lower temperature immunity than that bonded with ceramic glue. Both have a relatively low temperature fluctuation within the temperature range of 40°C-100°C, with less than 3 nm and 4.5 nm in the over 60°C changes, respectively. Our proposed fully open FPI is an economical, robust, and simple-to-fabricate structure with the potential for mass production. This renders it an appealing option for practical optofluidics applications.

Fabry-Perot Interferometer Embedded in a Glass Chip Fabricated by Femtosecond Laser

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Optical Fiber Fabry-Perot Interferometer Cavity Fabricated by Femtosecond Laser-Induced Water Breakdown for Refractive Index Sensing.

Miniaturized Fiber-Optic Fabry-Perot Interferometer for Highly Sensitive Refractive Index Measurement

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

Open-Cavity Fabry-Perot Interferometer Based on Etched Side-Hole Fiber for Microfluidic Sensing

In-line fiber optic optofluidic sensor based on a fully open Fabry-Perot interferometer

Ultra compact and sensitive optical fiber interferometric refractive index sensor

Hybrid Fabry-Perot Interferometer for Simultaneous Liquid Refractive Index and Temperature Measurement

Micro Fabry-Perot interferometers in silica fibers machined by femtosecond laser.

Hot-wire Sandwiched Fabry-Perot Interferometer for Microfluidic Flow Rate Sensing

Refractive index measurement using photonic crystal fiber-based Fabry-Perot interferometer.

FPI-based fibre-optic sensor fabricated by excimer laser micromachining and fusion splicing HCF for multi-parameter measurements

Polymer Microbubble-Based Fabry–Perot Fiber Interferometer and Sensing Applications

Refractive Index Measurement of Liquid Based on Open Fiber Fabry-Perot Interferometer

A Miniature Fiber-Optic Refractive-Index Sensor Based on Laser-Machined Fabry-Perot Interferometer Tip

PCF-based Fabry-Perot refractive-index sensor

Novel fabry-pérot fiber refractive-index sensor with microchannel

High-sensitivity Double-Parameter Sensor Based on the Fibre-Tip Fabry–Pérot Interferometer

Laser-Micromachined Fabry-Perot Optical Fiber Tip Sensor For High-Resolution Temperature-Independent Measurement Of Refractive Index