Abstract:Conventional rigid impellers are frequently used in the leaching process of phosphate rock, which often form a symmetrical flow field in the reactor, leading to a reduction in the leaching efficiency. In this work, a rigid-flexible combined impeller was applied to the leaching process of phosphate rock to increase the leaching efficiency. The effects of the reaction temperature (T), sulfuric acid excess coefficient (ε), liquid-solid ratio (L/S), agitation speed (N), and leaching time (t) on the leaching of phosphate rock were investigated, and based on this, the leaching kinetics was studied. The results indicated that under the optimum parameters of a reaction temperature of 353 K, a sulfuric acid excess coefficient of 1.15, a liquid-solid ratio of 4.0 mL/g, an agitation speed of 280 rpm, and a leaching time of 120 min, the leaching rate of phosphate rock using the rigid-flexible combined impeller reached 89.1%, which was 7.1% higher than that of the conventional rigid impeller under the same electric energy consumption. The leaching process complied with the unreacted core shrinking model, and the reaction rate was controlled by product layer diffusion. The apparent rate equation of the leaching process was 1 - 2X/3 - (1 - X)2/3 = 2.06 × 10-3[ε]1.375[L/S]1.273[N]0.748 exp(-19.03 × 103/RT)·t, and the apparent activation energy was 19.03 kJ/mol. The numerical simulation and analysis of the leaching residue showed that the system temperature in the rigid-flexible combined impeller system was homogenized, and the mixing effect of reactants was enhanced through the multiposition movement of the flexible connection piece in the axial direction, so that the reactants participated in the chemical reaction more efficiently.

Experimental study on cold model of fluidized middle and low grade phosphate rocks

Experimental Study on Fluidization Characteristics of Phosphate Ore Particles

Stable Operating Range and Solids Residence Time of Fine Fluorite Particles in the Two-Stage Fluidized Bed

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Fluidization of Cohesive Fluorite Particles at Ambient/High Temperatures and Enhancement Methods

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

Study on Fluidization Characteristics of Phosphate Ore Particles with Application of Vibration Field and Addition of SiO2 Particles

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Modeling of the Minimum Fluidization Velocity and the Incipient Fluidization Pressure Drop in a Conical Fluidized Bed with Negative Pressure

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Experimental Simulation Studies on Non-Uniform Fluidization Characteristics of Two-Component Particles in a Bubbling Fluidized Bed

Study on thermal reduction of phosphate ore by carbon in the fluidized bed reactor

Design and experimental investigation of a cold model for an interconnected fluidized bed reactor for biomass gasification

Experimental Investigation on Local Particle Volume Fractions Distribution in Offset-Exit Circulating Fluidized Bed

Effect of Gas Distributor on Fluidization Characteristics and Reduction Reaction of Mixed Phosphate Ore Particles

Fluidization characteristics of ore particles for downstream hydrogen mineral phase transformation equipment

Flow Characteristics and Defluidization Behavior with Agglomeration at High Temperature Fluidized Bed

Rigid-Flexible Combined Impeller Enhancement in Leaching of Phosphate Rock: a Kinetics Study