Abstract:The soil in front of a shield tunnel face can be pushed toward the ground surface if the support pressure is higher than the threshold that causes blow-out failure of the tunnel face. Most of the failure mechanisms used in the upper-bound analysis of a tunnel face have been derived from rigid-block failure mechanisms that are inconsistent with the failure mode observed in actual engineering practice. This article describes the construction of a new blow-out failure mechanism that is characterized by an arbitrary curve. Based on this failure mechanism and the Hoek–Brown (H-B) nonlinear failure criterion, an objective function that can be used to derive the upper-bound solution of the failure surface for a tunnel face is established in the framework of the upper-bound theorem. Using a variational approach, the equation of the failure surface that makes the objective function reach an extremum is obtained. On the basis of the analytical equation of the failure surface, the shapes of the failure surfaces for different parameters are plotted. By studying the influence of various parameters on the shape of failure surfaces, the changing laws of the shape of the failure surface for different parameters are obtained. To evaluate the validity of the upper-bound solution, the analytical results are compared with the numerical results provided by finite-difference software. By converting the parameters of the H-B failure criterion represented by normal and shear stresses into the parameters of the H-B failure criterion represented by the major and minor principal stresses, a comparison is made for equivalent conditions. The failure surface derived from the upper calculation and the shear-failure surface provided by the numerical simulation are found to be in agreement, which indicates that the method proposed is valid.

Upper Bound Solution of Supporting Pressure for a Shallow Square Tunnel Based on the Hoek-Brown Failure Criterion

Upper bound solutions for supporting pressures of shallow tunnels with nonlinear failure criterion

Upper Bound Analysis of Tunnel Face Stability in Layered Soils

Limit Analysis of Supporting Pressure in Tunnels with Regard to Surface Settlement

Upper Bound Limit Analysis of Collapse Shape for Circular Tunnel Subjected to Pore Pressure Based on the Hoek–Brown Failure Criterion

Upper Bound Solutions for the Face Stability of Shallow Circular Tunnels Subjected to Nonlinear Failure Criterion

Limit Analysis for the Face Stability of a Shallow-Shield Tunnel Based on a Variational Approach to the Blow-Out Failure Mode

Rigid Blocks Failure Mechanism for Stability of Shallow Tunnel Using Upper Bound Solution

Upper Bound Limit Analysis of Deep Tunnel Face Support Pressure with Nonlinear Failure Criterion under Pore Water Conditions

Three-Dimensional Upper Bound Limit Analysis of Tunnel Stability with an Extended Collapse Mechanism

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Upper Bound Limit Analysis of Roof Collapse in Shallow Tunnels with Arbitrary Cross Sections under Condition of Seepage Force

Upper bound solutions of supporting pressure of shallow cavities subjected to pore water pressure based on nonlinear failure criterion

Stability of Shallow Tunnel Using Rigid Blocks and Finite Element Upper Bound Solutions

Upper Bound Solution of the Safety Factor for a Shield Tunnel Face Subjected to the Hoek–Brown Failure Criterion

3D Rotational Failure Mechanism of Tunnel Face in Weathered and Saturated Hoek-Brown Rock Masses

Limit Analysis of Earth Pressure on Shallow Tunnel Using Nonlinear Failure Criterion

Limit Variation Analysis of Shallow Rectangular Tunnels Collapsing with Double-Layer Rock Mass Based on a Three-Dimensional Failure Mechanism

Upper Bound Limit Analysis for the Stability of Shield Tunnel Working Face Subjected to Non-associated Flow Rule

Upper Bound Solution of Surrounding Rock Pressure for Deep Cavity Using Nonlinear Hoek–Brown Failure Criterion

Roof Collapse of Shallow Tunnel in Layered Hoek-Brown Rock Media