Abstract:The soil in front of a shield tunnel face can be pushed toward the ground surface if the support pressure is higher than the threshold that causes blow-out failure of the tunnel face. Most of the failure mechanisms used in the upper-bound analysis of a tunnel face have been derived from rigid-block failure mechanisms that are inconsistent with the failure mode observed in actual engineering practice. This article describes the construction of a new blow-out failure mechanism that is characterized by an arbitrary curve. Based on this failure mechanism and the Hoek–Brown (H-B) nonlinear failure criterion, an objective function that can be used to derive the upper-bound solution of the failure surface for a tunnel face is established in the framework of the upper-bound theorem. Using a variational approach, the equation of the failure surface that makes the objective function reach an extremum is obtained. On the basis of the analytical equation of the failure surface, the shapes of the failure surfaces for different parameters are plotted. By studying the influence of various parameters on the shape of failure surfaces, the changing laws of the shape of the failure surface for different parameters are obtained. To evaluate the validity of the upper-bound solution, the analytical results are compared with the numerical results provided by finite-difference software. By converting the parameters of the H-B failure criterion represented by normal and shear stresses into the parameters of the H-B failure criterion represented by the major and minor principal stresses, a comparison is made for equivalent conditions. The failure surface derived from the upper calculation and the shear-failure surface provided by the numerical simulation are found to be in agreement, which indicates that the method proposed is valid.

Rigid Blocks Failure Mechanism for Stability of Shallow Tunnel Using Upper Bound Solution

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Upper Bound Analysis of Tunnel Face Stability in Layered Soils

An Efficient Probabilistic Design Approach for Tunnel Face Stability by Inverse Reliability Analysis

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Blow-out failure analysis of tunnel face in shallow slurry shield tunneling

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Stability Analysis of 3D Tunnel Face of Shallow Rectangular Shield Tunnel

Limit Analysis for the Face Stability of a Shallow-Shield Tunnel Based on a Variational Approach to the Blow-Out Failure Mode

Upper Bound Limit Analysis of Deep Tunnel Face Support Pressure with Nonlinear Failure Criterion under Pore Water Conditions

Analysis on face stability of rectangular cross-sectional shield tunneling based on an improved two-dimensional rotational mechanism

Upper Bound Limit Analysis of Slope Stability Based on Translational and Rotational Failure Mechanism

Limit Analysis of Collapse Mechanisms for Tunnel Roofs Subjected to Pore Water Pressure: A Numerical Approach

An analytical method of continuous upper bound limit analysis for the stability of shallow shield tunnels in cohesive-frictional soils

Upper-bound limit analysis of passive failure of a 3D shallow tunnel face under the bidirectional inclined ground surfaces

Reliability Analysis of Ground–support Interaction in Circular Tunnels Using the Response Surface Method

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

Probabilistic Analysis and Design of Circular Tunnels against Face Stability

3d Tunnel Face Stability Of Cross-River Shield Tunnel Considering Water Pressure

Limit equilibrium model for active failure of large-size rectangular tunnel face considering effect of height–width ratio

Prediction of limit support pressure for face stability of deep tunnels buried beneath sea/water