Abstract:The soil in front of a shield tunnel face can be pushed toward the ground surface if the support pressure is higher than the threshold that causes blow-out failure of the tunnel face. Most of the failure mechanisms used in the upper-bound analysis of a tunnel face have been derived from rigid-block failure mechanisms that are inconsistent with the failure mode observed in actual engineering practice. This article describes the construction of a new blow-out failure mechanism that is characterized by an arbitrary curve. Based on this failure mechanism and the Hoek–Brown (H-B) nonlinear failure criterion, an objective function that can be used to derive the upper-bound solution of the failure surface for a tunnel face is established in the framework of the upper-bound theorem. Using a variational approach, the equation of the failure surface that makes the objective function reach an extremum is obtained. On the basis of the analytical equation of the failure surface, the shapes of the failure surfaces for different parameters are plotted. By studying the influence of various parameters on the shape of failure surfaces, the changing laws of the shape of the failure surface for different parameters are obtained. To evaluate the validity of the upper-bound solution, the analytical results are compared with the numerical results provided by finite-difference software. By converting the parameters of the H-B failure criterion represented by normal and shear stresses into the parameters of the H-B failure criterion represented by the major and minor principal stresses, a comparison is made for equivalent conditions. The failure surface derived from the upper calculation and the shear-failure surface provided by the numerical simulation are found to be in agreement, which indicates that the method proposed is valid.

Limit Analysis for the Face Stability of a Shallow-Shield Tunnel Based on a Variational Approach to the Blow-Out Failure Mode

Blow-out failure analysis of tunnel face in shallow slurry shield tunneling

Upper Bound Analysis of Tunnel Face Stability in Layered Soils

An Efficient Probabilistic Design Approach for Tunnel Face Stability by Inverse Reliability Analysis

Face stability analysis of shield-driven tunnels shallowly buried in dry sand using 1-g large-scale model tests

An Implementation Of Finite Differential Calculation On Tunnel Face Stability

Model test of evolution of face instability in shallow shield tunnel

An improved mechanism for partial blowout instability of tunnel face in large slurry shield-driven tunnels

Probabilistic Analysis and Design of Circular Tunnels against Face Stability

Three-dimensional stability analysis of tunnel face considering the upper partial failure in layered rock masses

Upper-bound limit analysis of passive failure of a 3D shallow tunnel face under the bidirectional inclined ground surfaces

Stability Analysis of 3D Tunnel Face of Shallow Rectangular Shield Tunnel

Upper Bound Limit Analysis of Deep Tunnel Face Support Pressure with Nonlinear Failure Criterion under Pore Water Conditions

Upper-bound analysis on the face stability of a non-circular tunnel

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Numerical analyses for three-dimensional face stability of circular tunnels in purely cohesive soils with linearly increasing strength

Analysis of face stability at the launch stage of shield or TBM tunnelling using a concrete box in complex urban environments

Stability Analysis of a Shield Tunnel in Unsaturated Soil Considering the Soil Arch Effect

Reliability Analysis of Seismic Stability of Shield Tunnel Face under Multiple Correlated Failure Modes

Stability Analysis of the Horseshoe Tunnel Face in Rock Masses

Three-dimensional stability analysis of tunnel face based on unified strength theory