Abstract:The soil in front of a shield tunnel face can be pushed toward the ground surface if the support pressure is higher than the threshold that causes blow-out failure of the tunnel face. Most of the failure mechanisms used in the upper-bound analysis of a tunnel face have been derived from rigid-block failure mechanisms that are inconsistent with the failure mode observed in actual engineering practice. This article describes the construction of a new blow-out failure mechanism that is characterized by an arbitrary curve. Based on this failure mechanism and the Hoek–Brown (H-B) nonlinear failure criterion, an objective function that can be used to derive the upper-bound solution of the failure surface for a tunnel face is established in the framework of the upper-bound theorem. Using a variational approach, the equation of the failure surface that makes the objective function reach an extremum is obtained. On the basis of the analytical equation of the failure surface, the shapes of the failure surfaces for different parameters are plotted. By studying the influence of various parameters on the shape of failure surfaces, the changing laws of the shape of the failure surface for different parameters are obtained. To evaluate the validity of the upper-bound solution, the analytical results are compared with the numerical results provided by finite-difference software. By converting the parameters of the H-B failure criterion represented by normal and shear stresses into the parameters of the H-B failure criterion represented by the major and minor principal stresses, a comparison is made for equivalent conditions. The failure surface derived from the upper calculation and the shear-failure surface provided by the numerical simulation are found to be in agreement, which indicates that the method proposed is valid.

Reliability Analysis of Seismic Stability of Shield Tunnel Face under Multiple Correlated Failure Modes

Seismic reliability analysis of shield tunnel faces under multiple failure modes by pseudo-dynamic method and response surface method

System Reliability Assessment for a Rock Tunnel with Multiple Failure Modes

Research on Nonlinear Response of Shield Tunnel under Differential Subsidence Due to Earthquake

An Efficient Probabilistic Design Approach for Tunnel Face Stability by Inverse Reliability Analysis

Upper Bound Analysis of Tunnel Face Stability in Layered Soils

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Probabilistic Analysis of Underground Rock Excavations Using Response Surface Method and SORM

Reliability study on shield tunnel face using a random limit analysis method in multilayered soils

Reliability Analysis of Ground–support Interaction in Circular Tunnels Using the Response Surface Method

Limit Analysis for the Face Stability of a Shallow-Shield Tunnel Based on a Variational Approach to the Blow-Out Failure Mode

Probabilistic Analysis and Design of Circular Tunnels against Face Stability

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Three-dimensional stability analysis of tunnel face considering the upper partial failure in layered rock masses

Analysis of Coupled Seepage and Stress of Shield Tunnel Launching Accident in Soft Clay

Analysis of Superimposed Stress of Surrounding Soil Due to Shield Tunneling

Conditional Probability-Based System Reliability Analysis for Geotechnical Problems

Safe Range of Retaining Pressure for Three-dimensional Face of Pressurized Tunnels based on Limit Analysis and Reliability Method

Upper-bound limit analysis of passive failure of a 3D shallow tunnel face under the bidirectional inclined ground surfaces

Seismic fragility analysis of in-service shield tunnels considering surface building and joint-bolt corrosion

Three-Dimensional Face Stability Assessments of Seismic Tunnels in Weak Rock Masses