Abstract:The soil in front of a shield tunnel face can be pushed toward the ground surface if the support pressure is higher than the threshold that causes blow-out failure of the tunnel face. Most of the failure mechanisms used in the upper-bound analysis of a tunnel face have been derived from rigid-block failure mechanisms that are inconsistent with the failure mode observed in actual engineering practice. This article describes the construction of a new blow-out failure mechanism that is characterized by an arbitrary curve. Based on this failure mechanism and the Hoek–Brown (H-B) nonlinear failure criterion, an objective function that can be used to derive the upper-bound solution of the failure surface for a tunnel face is established in the framework of the upper-bound theorem. Using a variational approach, the equation of the failure surface that makes the objective function reach an extremum is obtained. On the basis of the analytical equation of the failure surface, the shapes of the failure surfaces for different parameters are plotted. By studying the influence of various parameters on the shape of failure surfaces, the changing laws of the shape of the failure surface for different parameters are obtained. To evaluate the validity of the upper-bound solution, the analytical results are compared with the numerical results provided by finite-difference software. By converting the parameters of the H-B failure criterion represented by normal and shear stresses into the parameters of the H-B failure criterion represented by the major and minor principal stresses, a comparison is made for equivalent conditions. The failure surface derived from the upper calculation and the shear-failure surface provided by the numerical simulation are found to be in agreement, which indicates that the method proposed is valid.

Limit Analysis of Earth Pressure on Shallow Tunnel Using Nonlinear Failure Criterion

Research on longitudinal nonlinear seismic response of shield tunnel

Research on Nonlinear Response of Shield Tunnel under Differential Subsidence Due to Earthquake

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Numerical Modeling of Soil and Structure Behavior for Tunneling in Different Types of Soil

Upper Bound Analysis of Tunnel Face Stability in Layered Soils

Upper Bound Limit Analysis of Deep Tunnel Face Support Pressure with Nonlinear Failure Criterion under Pore Water Conditions

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Blow-out failure analysis of tunnel face in shallow slurry shield tunneling

Probabilistic Analysis of Underground Rock Excavations Using Response Surface Method and SORM

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Three-Dimensional Upper Bound Limit Analysis on the Collapse of Shallow Soil Tunnels considering Roof Stratification and Pore Water Pressure

Limit Analysis of Collapse Mechanisms for Tunnel Roofs Subjected to Pore Water Pressure: A Numerical Approach

Limit Analysis for the Face Stability of a Shallow-Shield Tunnel Based on a Variational Approach to the Blow-Out Failure Mode

A lower bound solution of earth pressure of cohesive backfill with inclined slope surface

Upper-bound limit analysis of passive failure of a 3D shallow tunnel face under the bidirectional inclined ground surfaces

Limit Analysis of Shallow Tunnels Collapse Problem with Optimized Solution

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

An analytical method of continuous upper bound limit analysis for the stability of shallow shield tunnels in cohesive-frictional soils

Upper-bound Limit Analysis of Earth Pressure Based on Unified Strength Theory

Three-dimensional stability analysis of tunnel face considering the upper partial failure in layered rock masses