Abstract:By regulating the proportion of large and small boron nitride particles, BN-ZrO2-SiC composites with particle gradation are designed. Through the strategy of particle grading, small particles could be filled into the “card-house structure” formed by h-BN with large particle size, promoting the densification process. At the same time, this also shortens the mass transfer distance between particles, which is conducive to the mass transfer during the hot-pressing sintering. On the basis of achieving the second phase strengthening effect, the performance of hexagonal boron nitride composite has been further improved. The results demonstrate that by a volumetric proportionality of 6:4 between the constituent large particle (7 μm) and small (1 μm) particle. Thus, the BN-ZrO2-SiC composite with high density has been successfully fabricated at a sintering temperature of 1700°C under 25MPa. The optimization mechanical properties of BN-ZrO2-SiC composites are achieved when the volumetric ratio of large particle (7 μm) to small (1 μm) particle is 6:4. The optimal flexural strength, fracture toughness, Vickers’ hardness and elastic modulus is 187 ± 4 MPa, 2.2 ± 0.3 MPa·m1/2, 0.74 ± 0.06 GPa, and 57 ± 1.1 GPa, respectively. Comparing to the h10 and H10 sample, the thermal conductivity of samples with particle size gradation has been improved, especially the H8h2 and H4h6 samples. The thermal conductivity is significantly enhanced from 14.79 W/(m·K) to 16.83 W/(m·K).

Microstructure and Mechanical Properties of Reactive Hot-Pressed BN-ZrB_2-ZrO_2 Composites

Microstructure, mechanical properties and thermal shock resistance of hot-pressed ZrO2(3Y)-BN composites

Mechanical Properties and Microstructure of in Situ Synthesized ZrB 2 -Zrn 1− X Composites

Effect of ZrO2 content on microstructure, mechanical properties and thermal shock resistance of (ZrB2+3Y-ZrO2)/BN composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

High temperature oxidation resistance of hot-pressed h-BN/ZrO 2 composites

Microstructure and mechanical properties of hot pressed ZrC-SiC-ZrB 2 composites

Role of h-BN content on microstructure and mechanical properties of hot-pressed ZrB2–SiC composites

Microstructures and Properties of Machiaable 3Y-Zro_2/bn Nanocomposites

Microstructure and Mechanical Properties of ZrB2-SiC Composites

Reactive hot pressing of ZrB2-SiC composites

Fabrication and properties of machinable 3Y–ZrO2/BN nanocomposites

Effect of BN grain size on microstructure and mechanical properties of the ZrB2–SiC–BN composites

Microstructure and Mechanical Properties of ZrB2–Nb Composite

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Investigation on the preparation and machinability of the B4C/BN nanocomposites by hot-pressing process

Beneficial effect of low BN additive on densification and mechanical properties of hot-pressed ZrB2–SiC composites

Inhibiting Effect of Additives on Formation of ZrC Phase in ZrB2–BN Composites by Reactive Hot Pressing

Processing and Properties of ZrB2-Cu Composites Sintered by Hot-Pressing Sintering

The Effect of Particle Size Gradation on the Microstructure, Mechanical and Thermal Physical Properties of BN-ZrO2-SiC Composites

ZrB2-ceramic toughened by refractory metal Nb prepared by hot-pressing