Abstract:<p>A great challenge in producing TiC reinforced metal matrix composites is encountered to directly add TiC particles into molten steel during casting owing to floating of nano-sized TiC on molten steels and agglomeration. As such, this work proposes a novel strategy using pre-distribution in situ nano-sized TiC/Al master alloy to fabricate 45 steel matrix composites reinforced with trace nano-sized TiC particles while without changing the original casting process; this strategy can effectively avoid the aforementioned challenge. The average grain sizes of as-cast and heat-treated 45 steel with 0.018 wt% nano-sized TiC particles remarkably decrease from 14.75 μm to 9.51 μm respectively to 8.77 μm and 5.46 μm respectively, which is attributed to that the nanoparticles provide effective nucleation sites and inhibit grain growth. Furthermore, adding trace nano-sized TiC particles significantly enhances their strength and toughness. The 45 steel matrix composites reinforced with 0.054 wt% nano-sized TiC particles exhibits the best tensile mechanical properties with yield strength of 624 MPa, ultimate strength of 920 MPa, elongation of 23.8% and impact toughness of 50.21 J/cm<sup>2</sup>, which are 19.3%, 13%, 10.2% and 38% respectively higher than the 45 steel. The strengthening and toughening mechanisms of 45 steel by nano-sized TiC are attributed to grain boundary strengthening, work hardening and dispersion strengthening. The strategy proposed in this work may provide a promising method for enhancing steel performances for industrial productions.</p>

Microstructure and Mechanical Properties of Common Straight Carbon Steels Strengthened by Tic Dispersion

Mechanical Properties and Thermal Stability of Carbide Dispersion Strengthened CLF-1 Steel

Microstructure, Mechanical Properties and Wear Resistance of Low Alloy Abrasion Resistant Martensitic Steel Reinforced with TiC Particles

Precipitation Behavior and Strengthening Effect of (Ti,Mo)C Particles in a Martensitic Steel

The microstructures of in-situ synthesized TiC by Ti-CNTs reaction in Cu melts

Influence of Ti content on mechanical properties of low carbon steel

Preparation, Microstructure and Mechanical Properties of In-Situ TiC/Al–Si–Fe Aluminum Matrix Composites

Role and mechanism of innovative addition process of trace nano-TiC p in microstructure manipulation and significant mechanical properties enhancement of H13 steels

Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles

Microstructure, mechanical properties and strengthening mechanism of in-situ synthesized TiC/6061 nanocomposites

Synergistic optimization in microstructure and mechanical properties of low carbon steel via trace amount of nano-sized TiC-TiB2

Study on the Dissolution and Precipitation Behavior of Self-Designed (NbTi)C Nanoparticles Addition in 1045 Steel

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

Microstructure and mechanical properties of TiC steel-bonded carbides prepared by two-step sintering technique

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

Microstructure manipulation mechanism and mechanical properties improvement of H13 steel via trace nano-(TiC + TiB2) particles

Dry Sliding Wear Properties of Annealed Carbon Steels Matrix Composites by Nanosized TiC‐TiB2 Particles

Superior strength-ductility combination in TiC/TC4 composites via In situ construction Ti 2 Cu nanoparticles

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Microstructure and mechanical properties of in-situ TiC hybrid reinforced TC4 matrix composites by a new additive manufacturing method