Abstract:The magnetron sputtering technique was employed to prepare Zr-alloyed Cu thin films with Zr addition ranging from 0 to 7.0 at.%. Microstructure evolution with Zr doping was characterized by using the transmission electron microscope and atom probe tomography. Plastic deformation characteristics (hardness, strain rate sensitivity and activation volume) of the Cu-Zr alloyed films were examined by using nanoindentation testing. Significant Zr doping effects on the microstructure were clearly uncovered that (i) the Zr segregated at grain boundaries and tuned the grain boundary structure. With increasing the Zr addition, CuZr amorphous particles at grain boundaries (3.0 at.% Zr) and even three dimensional CuZr amorphous grain boundary network (7.0 at.% Zr) were formed; (ii) the grains (size and morphology) and nanotwins were notably influenced by the Zr doping. In particular, the nanotwin thickness was reduced from similar to 25 nm in the pure Cu film down to 5 nm in the Cu-Zr alloyed films. Accompanied with the microstructure evolution, the Cu-Zr thin films displayed hardness and strain rate sensitivity highly sensitive to the Zr doping, i.e., hardness increasing while strain rate sensitivity decreasing with raising the Zr addition. The strengthening and deformation mechanisms were discussed in terms of the microstructure-property relationship. Three regimes were divided within the studied Zr doping range: grain/nanotwin boundary-dominated strengthening mechanism in the regime I of pure Cu film, dislocation nucleation-controlled nanotwin softening mechanism in the regime II of Zr addition <= 3.0 at.%, and intergranular amorphous layer-mediated strengthening mechanism in the regime III of Zr addition up to 7.0 at.%. In addition, the reduction in strain rate sensitivity with Zr doping was quantitatively described by adopting a model that involves the thermally activated partials depinning mechanism based on the effective dislocation segment length. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Microstructure, formation mechanism and compression plasticity of regularly faceted Cu particles

Self-formed Submicron-Scale Faceted Copper Particles on the Surface of Annealed Cu-Zr Films

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Study on self-formed regular Copper and Aluminum particles on the surface of annealed Cu (Al)-Zr alloyed films

Preparation and microstructure of nano-sized Cu particles by mechanochemical reaction

Stress Relaxation Induced Faceted Cu and W Particles on the Surfaces of Cu–Zr and W Thin Films

Nano-sized Amorphous Cu–Zr Alloy Particles Prepared by Mechanochemical Reaction

Plastic Deformation Mechanisms in Face-Centered Cubic Materials with Low Stacking Fault Energy

Microstructure and phase components of the as-cast Cu-0.4%Cr-0.12%Zr-0.01%Si

The Effects of CuO Particle Size on Microstructure Evolution of AgCuO Compo-Sites in Plastic Deformation Process: Finite Element Simulation and Experimental Study

Investigation of microstructure thermal evolution in nanocrystalline Cu

Plastic Deformation Characteristics of Cu/X (X=cu-Zr, Zr) Nanolayered Materials

Transition from Homogeneous-Like to Shear-Band Deformation in Nanolayered Crystalline Cu/amorphous Cu–Zr Micropillars: Intrinsic Vs. Extrinsic Size Effect

Effect of a Thin Cr Layer on the Microstructures and Fracture Behaviours of Copper Films

Atomistic deformation mechanisms in copper nanoparticles

A Method to Prepare Nano-Sized Copper Particles and Rods on the Surface of Cu Composite Films

The Strain Hardening of Micro-Sized Face-Centered-cubic Single Crystal Metals: A Crystal Plasticity Study

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases

Micro-Superplastic Behavior of Copper Oxide in AgCuO Composites

Zr Alloying Effect on the Microstructure Evolution and Plastic Deformation of Nanostructured Cu Thin Films

Microstructures and mechanical properties of Cu-Sn alloy subjected to elevated-temperature heat deformation