Abstract:Purpose The purpose of this work is to perform the finite element analysis (FEA) for the numerical discretization of sections with different arrangements of Web openings to investigate the torsion behavior. Typical hexagonal and circular Web opening sections are extensively used in steel construction due to economic development in building design. However, the use of sections with different arrangements of Web opening had improved the performance of the section with Web opening in terms of structural behavior which leads to economic design compared to typical I-beam. Design/methodology/approach The accuracy of FE results allows extensive numerical analysis of stress concentration magnitude for sections with Web openings, concentrating on the sizes and positions of the Web opening. Five shapes and three sizes of Web opening are used in this work. The shapes involved are c-hexagon, hexagon, octagon, circular and square, whereas the sizes of the Web opening involved are 0.67 D, 0.75 D and 0.80 D where D is the height of the Web. Two types of models for 200 × 100 × 8×6 mm steel section involved which is Model 1, where the section with 50 mm edge and 150 mm center-to-center distance and Model 2, where the section with 100 mm edge and 200 mm center-to-center distance. Findings It was found that these configurations affect the section with various shapes of Web openings sizes (0.67 D, 0.75 D, and 0.80 D). This also includes the spacing distances, with 50 mm edge and 150 mm center-to-center distance and also a section with 100 mm edge and 200 mm center-to-center distance. Through the FEA results of Model 1 and Model 2, it is found that 50% reduction in horizontal member length in hexagon Web opening, from 50 mm to 20 mm, caused increment about 30%–53% stress concentration in Web for c-hexagon. However, for a stress analysis of c-hexagon, geometry resulted in a lower stress concentration in the Web than other Web opening. Originality/value Additionally, the work emphasized the efficiency of Web opening shapes by using an appropriate Web opening radius in section with c-hexagon, hexagon, octagon, square and circular shapes. The final results show the contribution of appropriate Web opening radius to increase the section torsional capacity. It is observed that the torsional capacity at certain loading condition and its angle of twist is analysed.

FEM Analysis on Bearing Capacity of Cold-formed Thin-walled Steel Beam with C-shaped Section Openings

Finite element analysis on shear capacity of the corrugated web H-shaped steel beam

Computation of Local Bearing Stress in Web of Beams Supporting Overhead Cranes

Behaviour of Steel I Beams with Web Openings

Progressive collapse analysis of beam–column substructures considering various reduced beam web sections

Stress analysis of I-beam with web opening via finite element analysis and experimental study

Numerical Investigation and Design Rules for Flexural Capacities of H-section High-Strength Steel Beams with and Without Web Openings

Study on the effects of initial imperfections on stability bearing capacity of the web opening C-shaped cold-formed steel beam

Finite Element Analysis Of The Bearing Properties Of The Floor Structure Of Precast Inclined Support Cold-Formed Steel Building

Research on Performance of Reduced Web Connections in Steel Frame

Transverse Ultimate Loading Capacity Analysis of Beams with Web Openings

Modeling and Finite Analysis of Overall Structure Mechanical Behavior of Steel Frame—Cold-formed Thin-walled Steel Composite Wall

Numerical Analysis on Global Stability Performance of Fold-Fastened Multi-Cellular Steel Walls

Effects of openings on postbuckling behavior of large‐size composite C‐beam under bending‐shear coupling load

Analysis of effective flange width on composite steel-concrete beams with openings in concrete slab

The numerical assessment of stress distribution of I-beam with web opening

FEM ANALYSIS OF RESISTANCE OF REINFORCED BEAM-TO-COLUMN CONNECTION WITH COVER-PLATE UNDER LOADS IN STEEL FRAME

FEM Analysis on Cyclic Behavior of Improved Beam-Column Connections in Steel Frames

Finite Element Analysis of Bearing Properties of Floor Structure of Precast Cold-Formed Steel Building

Finite Element Analysis on Bearing Behavior of I-section Beam with Longitudinally Variable Thickness Flanges

ELASTIC LATERAL STABILITY ANALYSIS OF COMPOSITE STEEL-CONCRETE BEAMS WITH WHOLE OPENINGS IN CONCRETE SLAB