Abstract:Continuously welded rail (CWR) has been widely applied in modern railway structures, and its performance is directly related to the safety of railway transportation. After the removal of the rail joints, the CWR cannot expand and contract freely. The longitudinal temperature stress within the CWR turns out to be the core structural parameter in the maintenance and repair of the track. In this study, an ultrasonic theoretical model of the rail temperature force was established, and the mechanism of the critical refracted longitudinal wave to detect the rail temperature stress was analyzed. A numerical simulation calculation was conducted with the three-dimensional finite element model, and the longitudinal wave incidence angle, frequency, and transducer spacing were calculated. The impact of critical factors on the accuracy of refracted longitudinal wave detection temperature stress was investigated. The ultrasonic acoustic propagation under the corresponding stress value of the rail was calibrated to eliminate the influence of residual stress and ensure the accuracy of ultrasonic detection of temperature stress. Finally, an online rail temperature stress monitoring system was built, and a long-term operation was carried out in the Changzhou section of the Shanghai-Nanjing high-speed rail. The monitoring data of the line in 2019 was obtained, and the temperature stress change of the line was recorded. The data showed that the ultrasonic sound obtained by real-time monitoring could accurately reflect the temperature and force changes of the rail. This proposed method is expected to provide a solution for online and remote acquisition of the temperature stress of the CWR. The accumulated long-term monitoring data is of great significance to the prevention plan for rail expansion and rail breakage.

Research on Synchronous Switching and Inverse Model Control System of the Rail Online Heat Treatment Process

Online Partition-Cooling System of Hot-Rolled Electrical Steel for Thermal Roll Profile and Its Industrial Application

A method for long-term on-line monitoring of temperature stress of continuously welded rail

Numerical simulation on temperature field of rail with flame heat treatment

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

Numerical Simulation and Experimental Study on Heat Treatment Process of U20Mn Bainite Rail

Real-Time Heat Transfer Model Based on Variable Non-Uniform Grid for Dynamic Control of Continuous Casting Billets

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Control-oriented modeling and simulation of a low carbon steel A.C. resistance spot welding process

Research on Heat Treatment of Bainitic Steel Crossing

Optimal control for spatial-temporal distributed nonlinear autoregressive with exogenous inputs correlation model of steel rolling reheating furnace: a coordinated time-sharing control approach

Non-uniform Variation Characteristics of Temperature Field and Corresponding Thermal Effect of Longitudinal Continuous Slab Ballastless Track Structure

An Online Optimization Control System for Continuous Annealing Furnaces

Online Dynamic Control of Secondary Cooling for the Continuous Casting Process

The influence of vehicle system dynamics on rail foot heat transfer

Simulation and Control of Thermal Process in Bell-Type Annealing Furnace

Temperature Model and Predictive Control for Fuel Cells in Switcher Locomotive

Switching Difference Control of Parallel Streams Temperatures

Relationship between Microstructure and Properties of 1380 MPa Grade Bainitic Rail Steel Treated by Online Bainite-Based Quenching and Partitioning Concept

Dynamic Performance of CRTS III Ballastless Track Structure under the Train Load and Temperature

Adaptive iterative learning control of internal temperature for high-speed trains