Abstract:The generation of wheel–rail-sliding frictional heat is often accompanied by transverse displacement of a wheel. To study the thermal problem of wheel–rail sliding friction at two-point contact, this paper uses an LM tread wheel and a 60 kg·m−1 rail as examples. A thermal–mechanical-coupled finite-element model of equal proportion wheel–rail sliding is established. A direct-coupling method is used to analyze the thermal–mechanical coupling of the wheel–rail interface under sliding contact. This model considers the temperature-dependent material properties and boundary conditions, such as thermal convection and thermal dissipation, in the process of nonstationary frictional-heat conduction. Firstly, the effects of different sliding speeds, axle loads, and contact modes on the temperature and stress fields of the contact area are analyzed. Then, the lubrication and cooling effects of friction modifiers on the rail top and rail gauge angle are compared. The results show that, at a sliding speed of 2 m/s and an axle load of 30 t under a sliding condition of 200 mm, on the top and side of the rail, the temperatures at the contact patch centers are 813 °C and 547.7 °C, respectively. Under different operating conditions, the rail-side temperature is 55–75% of that of the temperature at the rail top, and the rail-side contact and friction stress values are 76–96% of those at the rail top. This indicates that frictional thermal damage on the rail side cannot be ignored. With a lower sliding speed, the thermal response of the two contact patches is closer. The impact of axle load on the frictional temperature and stress on the rail side is more critical than the sliding speed. The optimal lubrication choice is overall lubrication, which can decrease the rail top temperature by 47.2% and frictional stress by 56.2%, as well as decreasing the rail side temperature by 70.3% and frictional stress by 77.4%.

The influence of vehicle system dynamics on rail foot heat transfer

Dynamic Electromagnetic Thermography System for Rail Inspection

Implementation of Non-Contact Temperature Distribution Monitoring Solutions for Railway Vehicles in a Sustainability Development System Transport

Effects of the Dynamic Wheel–rail Interaction on the Ground Vibration Generated by a Moving Train

Dynamic Rail Near-Surface Inspection of Multiphysical Coupled Electromagnetic and Thermography Sensing System

Dynamic Performance of CRTS III Ballastless Track Structure under the Train Load and Temperature

Induction Thermography for Rail Nondestructive Testing under Speed Effect

Integration of brake block thermal equations within a railway vehicle multibody model: a multiphysics approach

Dynamic wheel/rail interactions for high-speed trains on a ballasted track

Thermal imaging of the disc brake and drive train in an electric locomotive in field conditions

Dynamic Wheel-Rail Interaction at High Speed Based on Time-Domain Moving Green's Functions

Embedding Kalker's variational theory into railway vehicle system dynamics and its efficiency improvement

Thermal–Mechanical Coupling Analysis of Wheel–Rail Sliding Friction under Two-Point Contact Conditions

Evaluation of typical rail defects by induction thermography: experimental results and procedure for data analysis during high-speed laboratory testing

Thermal model of DC conductors for railway traction networks: A hosting capacity assessment

Influence of individual wheel profiles on the assessment of running dynamics of a rail vehicle by numerical simulation: a case study

Analysis of the Temperature Characteristics of High-speed Train Bearings Based on a Dynamics Model and Thermal Network Method

Experimental and numerical investigation into the characteristics of continuously measured rail profiles and its influence on simulations of vehicle-track interaction

Non-Destructive Characterization of Railway Materials and Components with Infrared Thermography Technique

Dynamic performance of locomotive electric drive system under excitation from gear transmission and wheel-rail interaction

Assessing the fast non-Hertzian methods for wheel-rail rolling contact integrated in the vehicle dynamics simulation