Abstract:Non-fullerene organic photovoltaics (OPVs) have displayed the highest power conversion efficiencies (PCEs) among OPVs. Herein, we describe a two-donor (PM6, TPD-3F)/one-acceptor (Y6) ternary blend having an optimized blend morphology that leads to improved OPV performance. Because TPD-3F has a HOMO energy level deeper than that of PM6, the value of VOC of the corresponding ternary device increased. Good miscibility between PM6 and TPD-3F, in conjunction with device optimization through the use of 1-chloronaphthalene as an additive, provided an optimized ternary blend morphology for efficient exciton dissociation and carrier transport and, therefore, larger PCE. Compared with the preoptimized PM6:Y6 binary device, the ternary device functioned with improvements in its short-circuit current density, value of VOC, and fill factor. As a result, the device PCE improved from 15.5 ± 0.19 to 16.6 ± 0.25% under AM 1.5G (100 mW cm–2) irradiation. The champion cell exhibited a PCE of 17.0%—a value that is one of the highest for a ternary OPV. Furthermore, such devices exhibited outstanding shelf lifetimes, with long-term stability in air (25 °C, 40% humidity) without encapsulation; the performance remained high (at 15.4%) after storage for 820 h.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c19198?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c19198</a>.Characterization of materials, detailed device fabrication conditions, sheet resistances, optoelectronic properties, and surface energies of the substrates (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c19198/suppl_file/am0c19198_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Performance of Solar Cell Based on the Blend of MEH-PPV∶TiO2

The Performance of Solar Cell Based on Blends of Meh-Ppv and Pcbm of Various Compositions

Photovoltaic Cells with Tio2 Nanocrystals and Conjugated Polymer Composites

A large interconnecting network within hybrid MEH-PPV/TiO<sub>2</sub> nanorod photovoltaic devices

Enhanced Efficiency Of Polymer: Fullerene Bulk Heterojunction Solar Cells With The Insertion Of Thin Tio2

Hybrid poly (3-hexylthiophene)/titanium dioxide nanorods material for solar cell applications

Nanostructured Polymer Blends (P3HT/PMMA): Inorganic Titania Hybrid Photovoltaic Devices

Charge Separation and Transport Properties of Photovoltaic Devices Based on Mehppv/Tio2 Nanorods Hybrid Materials

Hybrid Solar Cells Based on Blends of Poly(3-Hexylthiophene) and Surface Dye-Modified, Ultrathin Linear- and Branched-Tio2 Nanorods

Plasmonic Ag@Oxide Nanoprisms for Enhanced Performance of Organic Solar Cells

Photovoltaic Devices Based on a Novel Poly(phenylene Ethynylene) Derivative

Bulk heterojunction solar cells based on two kinds of organic polymers and fullerene derivative

Efficient Polymer Photovoltaic Devices Based on Blend of MEH-PPV and C60 Derivatives

Improved Blend Film Morphology and Free Carrier Generation Provide a High-Performance Ternary Polymer Solar Cell

Enhanced Performance and Stability of TiO2-Nanoparticles-Based Perovskite Solar Cells Employing a Cheap Polymeric Surface Modifier

Enhanced efficiency of polymer: Fullerene bulk heterojunction solar cells with the insertion of thin TiO2 layer near the LiF/Al electrode

Enhancement of Photovoltaic Characteristics Using A Suitable Solvent in Hybrid Polymer/Multiarmed Cds Nanorods Solar Cells

Improved Charge Separation and Transport Efficiency in Poly(3-Hexylthiophene)-Tio2 Nanorod Bulk Heterojunction Solar Cells

All-Polymer Solar Cells Based on A Blend of Poly[3-(10-N-Octyl-3-Phenothiazine-Vinylene)Thiophene-Co-2,5-Thiophene] and Poly[1,4-Dioctyloxyl-P-2,5-Dicyanophenylenevinylene]

Enhancing the Performance of Nanocrystalline TiO2 Dye-Sensitized Solar Cells with Phenothiazine-Doped Blended Solid Polymer Electrolyte

Interfacial nanostructuring on the performance of polymer/TiO2 nanorod bulk heterojunction solar cells.