Abstract:As a typical carbon-based material, activated carbon (AC) has satisfied adsorption performance and is of great significance in the field of volatile organic compounds (VOCs) pollutants removal. In order to further reveal the optimization mechanism of AC adsorption performance, coconut shell-based AC was selected as the research object, and different concentrations of HNO 3 coupled with microwave were used for rapid modification and activation. The characteristic changes of pore structure and surface chemical of AC before and after rapid modification were analyzed, and the performance changes of VOCs absorption were discussed from the perspective of reaction kinetics. The pore structure and surface chemical properties of before and after modification were analyzed by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Brunauer-Emmeta-Teller (BET) analysis, Fourier Transform Infrared Spectroscopy (FTIR), and Boehm titration. The results showed that HNO 3 coupled with microwave could significantly eliminate impurities in the pores of AC. After impregnation in HNO 3 at a concentration of 1.5 mol L −1 and under microwave irradiation of 900 W, the number of micropore on the surface of samples increased slightly. When the impregnation concentration of HNO 3 continued to increase, the two adjacent pore structures of the samples merged, which lead to a large decrease in the number of micropore and a corresponding increase in the proportion of mesoporous. Meanwhile, the specific surface area S BET of the modified NAC-6 sample increased to 1,140.40 m 2 g −1 , and the total acidic oxygen-containing functional groups on the surface increased by 0.459 mmol g −1 compared to that of the unmodified raw carbon. Furthermore, by analyzing the experimental results of formaldehyde adsorption on AC samples, it was concluded that the saturated adsorption capacity of the modified NAC-6 sample was 43% higher than that of the raw carbon. This study provides a more convenient and faster modification method for AC in the field of gas phase pollutants purification, which is helpful to realize the practical engineering application of AC with high efficiency, energy saving and sustainable.

Microwave-assisted Solvent Regeneration of Activated Carbon

Desorption of Non-Polar Organics on PDVB Resin under Microwave Radiation Cooperated with Atomized Water

Microwave-assisted Regeneration of Hyper-crosslinked Polymeric Resin for Absorbing Nitro-phenol

Microwave-Assisted Regeneration of Hypercrosslinked Polymeric Adsorbent Saturated with Nitrophenols

Regeneration of acid orange 7-exhausted granular activated carbons with microwave irradiation.

Heat and mass transfer simulation of the microwave-assisted toluene desorption for activated carbons regeneration

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Microwave thermal regeneration characteristics of spent activated carbon based on a coupled electromagnetic, heat and mass transfer multiphase porous media model

Effects of Microwave Modification on the Desulfurization and Denitrification of Activated Coke

Microwave assisted preparation of activated carbon from biomass: A review

Electrochemical regeneration of activated carbon loaded with p-nitrophenol in a fluidized electrochemical reactor

Rapid, simple and sustainable preparation of N-rich activated carbons with high performance for gas adsorption, via microwave heating

The enhancement mechanism of the microwave-assisted toluene desorption for activated carbon regeneration based on the constructive interference

A Novel Method of Microwave Heating Mixed Liquid-Assisted Regeneration of V 2 O 5 –WO 3 /tio 2 Commercial SCR Catalysts

Ultrasonic regeneration of activated carbon in water plants and correlation of adsorption performance

Adsorption of Volatile Organic Compounds and Microwave 1 Regeneration on Self-Prepared High-Surface-Area Beaded Activated 2 Carbon

The mechanism of de-SO2and De-NOx with solid waste by microwave effect

Impacts of controlled microwave field irradiation on o-cresol and p-cresol adsorption capability of activated carbon

Discussion on Activated Carbon Regeneration Method

Performance optimization and kinetic analysis of HNO3 coupled with microwave rapidly modified coconut shell activated carbon for VOCs adsorption

Tailored Design of Graphitic Biochar for High-Efficiency and Chemical-Free Microwave-Assisted Removal of Refractory Organic Contaminants