Abstract:A regeneration method for porous electrospun membranes embedding alumina nanoparticles saturated with minocycline was investigated by UV-LED system. The percentage of adsorption capacities before and after regeneration were used to evaluate regeneration efficiency. The PVDF and PVDF-Al2O3 fiber mats were prepared by electrospinning technique. Scanning electron microscope (SEM), transmission electron microscope (TEM), energy-dispersive X-ray spectroscopy (EDS) analyses directly confirmed that Al2O3 nanoparticles were generally exposed to the surface of PVDF-Al2O3 fiber mats. Among them, PVDF-Al2O3 10% fiber mats can effectively adsorb minocycline (remove efficiency >97% in 18 h) with ﬁrst-order rate constant k = 2.253 ± 0.331 h-1. The sorption capacity can still keep 81% after five sorption/UV-regeneration circulations. Two successional stages may exist during regeneration: (i) transfer of minocycline from the surface of PVDF-Al2O3 fibers to the DI water, followed by the (ii) decomposition of this compound in aqueous solution by direct and indirect photolysis to yield the intermediate species. The desorption capacity and desorption percentage were 4.39 mg g-1 and 23.30% respectively. The regeneration yields were further enhanced to 94.20% by UV radiation. Minocycline was effectively degraded to intermediate products by direct and indirect photolysis, further degraded into CO2, H2O, and NOx by UV-generated ozone during regeneration. The results indicated that UV radiation was an effective method of regenerating PVDF-Al2O3 fiber mats with low energy requirements. The photochemical byproducts and the reaction sites during regeneration were also determined and recognized.

Microwave-Assisted Regeneration of Hypercrosslinked Polymeric Adsorbent Saturated with Nitrophenols

Microwave-assisted Regeneration of Hyper-crosslinked Polymeric Resin for Absorbing Nitro-phenol

Desorption of Non-Polar Organics on PDVB Resin under Microwave Radiation Cooperated with Atomized Water

Microwave-assisted Solvent Regeneration of Activated Carbon

Microwave thermal regeneration characteristics of spent activated carbon based on a coupled electromagnetic, heat and mass transfer multiphase porous media model

Regeneration of acid orange 7-exhausted granular activated carbons with microwave irradiation.

Photo-modulated regeneration of hypercrosslinked polymer adsorbents for water treatment

Adsorption of Volatile Organic Compounds and Microwave 1 Regeneration on Self-Prepared High-Surface-Area Beaded Activated 2 Carbon

Temperature Response of Adsorbent/Desorbent Systems in Microwave Field

Heat and mass transfer simulation of the microwave-assisted toluene desorption for activated carbons regeneration

The mechanism of de-SO2and De-NOx with solid waste by microwave effect

The enhancement mechanism of the microwave-assisted toluene desorption for activated carbon regeneration based on the constructive interference

Chemically/Electrically-assisted Regeneration of Polyacrylonitrile-based Hydrogel Adsorbed Heavy Metals

Regeneration of porous electrospun membranes embedding alumina nanoparticles saturated with minocycline by UV radiation

Regeneration behavior of solid desiccants with microwave drying

EFFECT OF POLARITY OF POLYMERIC ADSORBENTS ON DESORPTION OF VOCs UNDER MICROWAVE FIELD

Preparation of High Surface Area Activated Carbon from Spent Phenolic Resin by Microwave Heating and KOH Activation

Adsorption and desorption hysteresis of 4-nitrophenol on a hyper-cross-linked polymer resin NDA-701.

Synthesis and progress of thermosensitive adsorbents in heat and humidity treatment: A review

Chemical and Biological Regeneration of HDTMA-modified Montmorillonite after Sorption with Phenol.

Characterization and Potential Applications of Hydrochars Derived from P- and N-Enriched Agricultural and Antibiotic Residues Via Microwave-Assisted Hydrothermal Conversion