Abstract:Multifunctional epoxy resins are inherently brittle due to the extremely high cross‐linking density, thus the enhancement in the toughness is rather important for the industrial application. In this work, a reactive poly(hydroxyethyl methacrylate)‐b‐poly(propylene glycol)‐b‐poly(hydroxyethyl methacrylate) (PHEMA‐PPG‐PHEMA) is synthesized by using an atom transfer radical polymerization to toughen trifunctional diglycidyl 4,5‐epoxy cyclohexane‐1,2‐dicarboxylate (TDE‐85). A controllable system is constructed, in which the reaction temperature of TDE‐85 with the hydroxyl of PHEMA‐PPG‐PHEMA is lower than with the curing agent. As a result, both heterogeneous and homogeneous structures can be formed in composites through controlling reaction temperature. It is found that the toughness of composites with the heterogeneous structure is effectively improved without sacrificing the tensile strength, tensile modulus, and glass transition temperature. Specifically, the mode‐1 critical stress intensity factor and critical strain energy release rate of TDE‐85/10 wt% PHEMA‐PPG‐PHEMA are increased to 0.77 MPam1/2 and 146 J/m2, respectively, which are effectively enhanced by 32.8% and 70.3%. This can be ascribed to combined toughening effects from the cavitation of the PHEMA‐PPG‐PHEMA phase, the matrix shear yielding, and the enhanced interface bonding strength due to the reaction between TDE‐85 and PHEMA‐PPG‐PHEMA. Thus, this study paves a novel strategy to improve the toughness of epoxy resin by controlling the curing reaction.

Novel Dibutyltin Oxide‐tributyl Phosphate Condensate As Accelerator for the Curing of the Epoxy Resin/4,4′‐diamino Diphenyl Sulfone System. II. Toughening of the Resin with Hydroxyl‐terminated Poly(tetramethylene) Glycols

TOUGHENING OF EPOXY RESINS BY HYDROXYL-TERMINATED POLYETHER WITH Bu2SnO-Bu3PO4 CONDENSATE AS CATALYST

Novel Dibutyltin Oxide–tributyl Phosphate Condensate As Accelerator for the Curing of the Epoxy Resin/4,4′‐diamino Diphenyl Sulfone System. I. Chemical Reactions and Properties of the Cured Resin

STUDY ON DGE-BHBTMBP/E-51/DDS CURED

Studies on Adhesion Performance of Epoxy Resin/Polymercaptan Toughened with Propoxylated Glycerin Triglycidyl Ether

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

Nonisothermal Reaction, Thermal Stability and Dynamic Mechanical Properties of Epoxy System with Novel Nonlinear Multifunctional Polyamine Hardener

Thermal properties of an epoxy cresol-formaldehyde novolac/diaminodiphenyl sulfone system modified by bismaleimide containing tetramethylbiphenyl and aromatic ether structures

Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy

Toughening Of Epoxy Resin Using Reactive Liquid (Ctbn) Rubber

Morphology and properties of TGDDM/DDS epoxy systems toughened by amino-bearing phenyl silicone resins

Enhancing toughness, flame retardant, hydrophobic and dielectric properties of epoxy resin by incorporating multifunctional additive containing phosphorus/ silicon

Epoxy Toughening Using Low Viscosity Liquid Diglycidyl Ether of Ethoxylated Bisphenol‐a

Toughness modification of cationic UV-cured cycloaliphatic epoxy resin by hydroxyl polymers with different structures

Synthesis of poly(hydroxyethyl methacrylate)‐b‐poly(propylene glycol)‐b‐poly(hydroxyethyl methacrylate)reactive block copolymer with controlled reactivity for toughening multifunctional epoxy resin

The synthesis of an epoxy-terminated hyperbranched polysiloxane toughener and its application at low temperature

A Novel Glycidyl Ether Type Tetrafunctional Epoxy Resin: Synthesis, Cure Kinetic and Properties

Promotion on the thermal and mechanical behaviors of epoxy resin using phthalonitrile and functionalized‐SiO2

Isocyanate-terminated Polyethers Toughened Epoxy Resin:Chemical Modification,Thermal Properties,and Mechanical Strength

Sustainably Sourced and DOPO-derived Triol As Hardeners for Epoxy Thermosets: A Promising Solution to Synchronously Improve Flame Retardancy, Mechanical Strength and Toughness

Cyanate Ester Resin Modified by Hydroxyl‐terminated Polybutadiene: Morphology, Thermal, and Mechanical Properties