Abstract:A hybrid architecture system was prepared via in situ formation of SiO2 nanoparticles in the cavities of COOH‐terminated hyperbranched aromatic polyester. The hybrid system could endow epoxy resins with outstanding mechanical property. A hybrid architecture system was developed via in situ formation of SiO2 nanoparticles in the cavities of COOH‐terminated hyperbranched aromatic polyester (CHBPE). Results show that SiO2 nanoparticles can be successfully anchored in the cavities of CHBPE owing to the hyperbranched structure of CHBPE. The resulting CHBPE‐SiO2 system is applied to epoxy (EP) resins using 4,4′‐diaminodiphenyl sulfone (DDS) as curing agent. Because –COOH groups in CHBPE‐SiO2 system can react with epoxy groups, the conversion of epoxy groups in EP/CHBPE‐SiO2 systems can be improved, and the strong interface interaction between EP matrix and CHBPE‐SiO2 can be realized. The resulting EP/CHBPE‐SiO2 composites have excellent mechanical property. When the contents of CHBPE‐SiO2 are 8%–20%, the impact strengths, the flexural strengths and the tensile strengths of EP/CHBPE‐SiO2 composites can reach 24–46 kJ/m2, 121–165 MPa and 57–71 MPa, respectively, which are 16.1–31.9‐fold, 4.0–5.9‐fold and 8.9–11.3‐fold higher than those of pure EP, respectively. EP/16%CHBPE‐SiO2 composites have the optimal comprehensive mechanical property. The initial thermal decomposition temperature at 5 wt% weight loss (Tdi) and glass‐transition temperature (Tg) of EP composites can increase by 70–84°C and 30–43°C, respectively, after introducing 8%–20% CHBPE‐SiO2. Moreover, the dielectric constants of EP composites with 8%–20% CHBPE‐SiO2 decrease by 3%–11% as compared to pure EP. The high dispersion of SiO2 in EP/CHBPE‐SiO2 composite and the strong interface interaction between EP matrix and CHBPE‐SiO2 can contribute to the outstanding comprehensive property of EP/CHBPE‐SiO2 composite.

Promotion on the thermal and mechanical behaviors of epoxy resin using phthalonitrile and functionalized‐SiO2

Thermal properties of an epoxy cresol-formaldehyde novolac/diaminodiphenyl sulfone system modified by bismaleimide containing tetramethylbiphenyl and aromatic ether structures

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Nonisothermal Reaction, Thermal Stability and Dynamic Mechanical Properties of Epoxy System with Novel Nonlinear Multifunctional Polyamine Hardener

Investigation on the Curing and Thermal Properties of Epoxy/Amine/Phthalonitrile Blend

The influence of phthalonitrile monomer containing oxazine ring on the properties of epoxy/amine system: Curing behavior and thermal stability

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Simultaneous enhancement of thermal and dielectric properties of phthalonitrile resin via an organic-inorganic hybrid approach

Effects of self-promoted curing behaviors on properties of phthalonitrile/epoxy copolymer

Constructing nano SiO2‐anchored hyperbranched polymer hybrid architectures for thermosetting epoxy systems with outstanding mechanical property

Promoting effect of methyne/methylene moiety of bisphenol E/F on phthalonitrile resin curing: Expanding the structural design route of phthalonitrile resin

Novel rich aromatic and phosphorus-containing compound cured epoxy resins toward outstanding comprehensive performances

Study on the Curing Behavior of Polythiol/phenolic/epoxy Resin and the Mechanical and Thermal Properties of the Composites

Curing Behavior and Microstructure of Epoxy-Poss Modified Novolac Phenolic Resin with Different Substitution Degree

Synthesis of oligomeric phthalonitrile resins containing imide units and study of the methylene-cyano thermal synergistic polymerization effect

Enhanced Mechanical and Thermal Properties of Phenolic-Type Phthalonitrile Nanocomposites with Fumed Silica Nanoparticles

Phase Behaviour and Mechanical Properties of Epoxy Resin Containing Phenolphthalein Poly(ether Ether Ketone)

Synthesis, curing and thermal properties of the low melting point phthalonitrile resins containing glycidyl groups

Curing Kinetics and the Properties of KH560-SiO2/Polyethersulfone/Bismaleimide-Phenolic Epoxy Resin Composite

Preparation, Thermal Properties, and Flame Retardance of Epoxy–silica Hybrid Resins

Curing Behaviors and Properties of Epoxy and Self-Catalyzed Phthalonitrile with Improved Processability