Abstract:In our continual effort to develop a cost effective rechargeable Zn-air batteries, herewith, we demonstrated Zn anodes comprising of (i) 30 wt.% Zn: 3 wt.% bismuth oxide: 10 wt.% potassium sulfide (ZBK), (ii) 30 wt.% Zn: 3 wt.% bismuth oxide: 5 wt.% lead (II) oxide (ZBP), and (iii) 30 wt.% Zn: 3 wt.% bismuth oxide: 10 wt.% potassium sulfide: 5 wt.% lead (II) oxide additives (ZBKP) in 6 M KOH aqueous solutions and 1.88 wt.% polyacrylic acid as the gelling agent. KOH gel constituted the remaining mass of the anode wt.%. Results were confirmed via cycle voltammetry (CV), Tafel, electrochemical impedance spectroscopy (EIS), etc., measurements. Among the various Zn anodes analyzed, ZBKP showed a superior cathodic peak of − 1.805 and 1.950 V vs. Hg/HgCl at 5th and 40th cycles during electrochemical cycle voltammetry. Tafel fitting on linear polarization test shows that ZBK exhibits the highest corrosion behavior followed by ZBP while ZBKP has the lowest corrosion behavior with an estimated corrosion inhibition efficiency of 36.06%. Furthermore, ZBKP displays the lowest dendrite growth, least corrosion rate, and superior capacity even at 60th cycles compared to ZBK and ZBP. In view of our finding, ZBKP has a higher positive electrode potential compare to ZBK and ZBP electrodes. Thus, ZBKP is the most suitable for aqueous battery due to its low minimal side effect. Field emission-scanning electron microscopy/energy dispersive x-ray spectroscopy (FE-SEM/EDS) images confirm that the various elemental additives were evenly deposited on the Zn anode surface. Ex situ spectroscopy and electrochemical performance studies also verified that the dendrite-free nature of improved Zn anode and the modified interfaces between electrolyte and Zn play vital roles towards advancing the energy storage performance. With all this indices and yard stick, the level of improvement we demonstrated in this current study is attractive for the design of an advanced secondary zinc-air batteries.

Study of the performance of secondary alkaline pasted zinc electrodes

Effects of calcium additive on performance of pasted zinc electṙode

Effects of calcium additive on performance of pasted zinc electrode

Effects of Barium on the Performance of Secondary Alkaline Zinc Electrode

Effects of Ph Value of Reaction Solution on Structure and Electrochemical Performance of Calcium-Containing Active Material of Secondary Zinc Electrodes

Effect of additives on zinc electrodes in alkaline battery systems

Preparation of Ce(OH)3/calcium 3 /calcium Zincate Composite Materials and Performance in Zinc-Nickel Batteries

Study of Quaternary Ammonium Additives towards High-Rate Zinc Deposition and Dissolution Cycling for Application in Zinc-Based Rechargeable Batteries

Enhancing Secondary Alkaline Battery Performance: Synthesis and Electrochemical Characterization of Zn Anodes, Based on ZnO@C Core‐Shell Nanoparticles

Effect of Additives on Performance of Alkaline Silver-Zinc Battery

Effects of Surface Conditions of Zinc and Additives on Electrodeposition of Zinc from Zincate Solutions

Screening Metal Cation Additives Driven by Differential Capacitance for Zn Batteries

Long-Life and Highly Utilized Zinc Anode for Aqueous Batteries Enabled by Electrolyte Additives with Synergistic Effects

Effects of Metallic Cobalt Addition on the Performance of Pasted Nickel Electrodes

Effects of Coprecipitated Zinc on the Structure and Electrochemical Performance of Ni/Al-layered Double Hydroxide

Elucidating the Performance Variations and Critical issues of Zn Electrodes in Different Types of Aqueous Electrolytes for Zn-based Rechargeable Batteries

Electrodeposited Zinc-Based Films as Anodes for Aqueous Zinc Batteries

The effects of anode additives towards suppressing dendrite growth and hydrogen gas evolution reaction in Zn-air secondary batteries

Sn6O4(OH)(4) Coated on ZnO Surface: Preparation and Application in Zinc-Nickel Secondary Battery

Advancements in Achieving High Reversibility of Zinc Anode for Alkaline Zinc‐based Batteries

Influence of Cathodic Overpotential and Zincate Concentration on Zinc Deposition in Alkaline Solution